Compliance & Certifications

• ADA compliant approach, clearances, and operability
• IBC compliant storefront entrance assembly
• Hardware:Grade 1 - UL Listed - ANSI/BHMA certified components (e.g., A156.4 closers, A156.5 locks/latches, A156.6 trim)
• Glazing: 1/4" tempered safety glass for commercial use - door pre-glazed - sidelite and transom field-glazed

Configuration & Key Features

• Overall frame size: 111.5" W x 121.75" H
• Door leaf: 36" x 84" (LH) medium stile with approx. 3-1/2" vertical stiles - factory pre-glazed
• Transom: 36" tall fixed lite - glass ships separately - field-glazed
• Sidelites: left and right 36" wide fixed lites - glass ships separately - field-glazed
• Finish: architectural clear anodized aluminum framing, rails, and stiles
• Duty rating: standard-duty for moderate-traffic commercial entrances
• Frame: pre-fabricated, knock-down kit for field assembly
• Water management:head sill flashing at the door head + bottom sill channel at base to collect and direct water away

What’s Included

• Pre-fabricated storefront frame members to assemble to 111.5" x 121.75" in the field (jambs, head, mullions, threshold)
• 36" x 84" LH medium-stile door with 1/4" tempered glass pre-glazed at factory
• 36" transom framing and dual 36" sidelite framing - glass ships separately for field glazing
• Head sill flashing for integration with WRB at the door head
• Bottom sill channel at base to assist drainage and help prevent water intrusion
• Deadbolt lock (Grade 1 - UL Listed - ANSI/BHMA certified)
• ADA hydraulic door closer (Grade 1 - UL Listed - ANSI/BHMA A156.4 compliant)
• Heavy-duty pivot hinges (top and bottom - ANSI/BHMA certified)
• Exterior: solid aluminum pull - Interior:push bar (ANSI/BHMA A156.6 compliant)
• Fastener kit for door hardware components (frame anchoring by installer)

All primary hardware is Grade 1 - UL Listed - ANSI/BHMA certified for reliable, code-oriented performance.

Wall Type & Mounting (Exterior Block / CMU Wall)

Designed for CMU/masonry block substrates. Field assemble the frame, square and brace, then anchor at jambs, head, mullions, and threshold using masonry-rated anchors. Ensure the opening is plumb, level, and structurally sound before installation.

• Field assemble frame - verify diagonal measurements before anchoring
• Use sleeve/wedge or engineer-approved CMU anchors at specified points
• Install head sill flashing and integrate with WRB and sealants for continuous protection
• Set and seal the bottom sill channel at the base to promote drainage and help prevent intrusion
• Field glaze sidelite and transom lites with supplied stops and gaskets per instructions
• Seal perimeter with backer rod and commercial-grade sealant - coordinate sill and threshold waterproofing
• Confirm latch alignment, smooth swing, and ADA approach clearances

Dynabolts for CMU/block anchoring are not included - installer selects diameter and embedment to suit block density and engineering. Sidelite and transom glass ship separately in a protective crate for field glazing.

Specifications

• Overall Frame: 111.5" W x 121.75" H (field-assembled)
• Door Leaf: 36" W x 84" H - LH - medium stile (~3-1/2" stiles) - pre-glazed
• Transom: 36" tall - glass ships separately - field-glazed
• Sidelites: two 36" W panels - glass ships separately - field-glazed
• Glazing: 1/4" tempered safety glass (door pre-glazed - sidelite/transom field-glazed)
• Material/Finish: heavy-wall aluminum - clear anodized
• Hardware: Grade 1 UL Listed - ANSI/BHMA certified (closer, lock, pivots, pull/push)
• Water Management: head sill flashing at door head - bottom sill channel at base
• Use: standard-duty - moderate-traffic
• Origin: Made in USA
• Production: 3–4 week lead time

Quality, Shipping & Packaging

• Door leaf ships pre-glazed and protected
• Frame ships as a pre-fabricated, knock-down kit for field assembly
• Sidelite & transom glass ship separately in a dedicated crate for field glazing
• Head sill flashing and bottom sill channel included for water intrusion mitigation
• Installation instructions included