Compliance & Certifications

• ADA compliant approach, clearances, and operability
• IBC compliant storefront entrance assembly
• Hardware:Grade 1 - UL Listed - ANSI/BHMA certified (e.g., A156.4 closers, A156.5 locks/latches, A156.6 trim)
• Glazing: 1/4" tempered safety glass - door pre-glazed - sidelite and transom field-glazed

Configuration & Key Features

• Overall frame size: 111.5" W x 121.75" H
• Door leaf: 36" x 84" (LH) medium stile with approx. 3-1/2" vertical stiles - factory pre-glazed
• Transom: 36" tall fixed lite - glass ships separately - field-glazed
• Sidelites: left and right 36" wide fixed lites - glass ships separately - field-glazed
• Finish: architectural clear anodized aluminum
• Duty rating: standard-duty for moderate-traffic commercial entrances
• Frame: pre-fabricated, knock-down kit for field assembly
• Water management:head sill flashing and bottom sill channel to direct water away from the frame and base

What’s Included

• Pre-fabricated storefront frame members to assemble to 111.5" x 121.75" (jambs, head, mullions, threshold)
• 36" x 84" LH medium-stile door with 1/4" tempered safety glasspre-glazed
• 36" transom framing and dual 36" sidelite framing - glass ships separately for field glazing
• Head sill flashing for integration with WRB at the door head
• Bottom sill channel at base to assist drainage and help prevent water intrusion
• Deadbolt lock (Grade 1 - UL Listed - ANSI/BHMA certified)
• ADA hydraulic door closer (Grade 1 - UL Listed - ANSI/BHMA A156.4 compliant)
• Heavy-duty pivot hinges (top and bottom - ANSI/BHMA certified)
• Exterior: solid aluminum pull - Interior:push bar (ANSI/BHMA A156.6 compliant)
• Fastener kit for door hardware components (frame anchoring by installer)

All primary hardware is Grade 1 - UL Listed - ANSI/BHMA certified for reliable, code-compliant performance.

Wall Type & Mounting (Exterior Steel Stud Wall with Veneer)

Designed for steel stud wall systems with exterior veneer such as brick, stone, or stucco. Field assemble the frame, square and brace, then anchor to structural members at jambs, head, and sill using metal stud fasteners or structural screws. Ensure the opening is plumb, level, and properly backed with continuous framing.

• Field assemble frame - verify diagonal measurements before anchoring
• Anchor to studs or header using self-drilling or structural fasteners rated for light-gauge steel
• Install head sill flashing and integrate with WRB and veneer cladding
• Set and seal the bottom sill channel at base for drainage and water protection
• Field glaze sidelite and transom glass using provided stops and gaskets
• Seal perimeter with commercial-grade backer rod and sealant to ensure envelope integrity
• Confirm latch alignment, smooth swing, and ADA approach clearances

Anchors for steel studs are not included - installer selects appropriate fasteners for stud gauge and framing conditions. Sidelite and transom glass ship separately in a protected crate for field glazing.

Specifications

• Overall Frame: 111.5" W x 121.75" H (field-assembled)
• Door Leaf: 36" W x 84" H - LH - medium stile (~3-1/2" stiles) - pre-glazed
• Transom: 36" tall - glass ships separately - field-glazed
• Sidelites: two 36" W panels - glass ships separately - field-glazed
• Glazing: 1/4" tempered safety glass (door pre-glazed - sidelite/transom field-glazed)
• Material/Finish: heavy-wall aluminum - clear anodized
• Hardware: Grade 1 UL Listed - ANSI/BHMA certified (closer, lock, pivots, pull/push)
• Water Management: head sill flashing at door head - bottom sill channel at base
• Use: standard-duty - moderate-traffic
• Origin: Made in USA
• Production: 3–4 week lead time

Quality, Shipping & Packaging

• Door leaf ships pre-glazed and protected
• Frame ships as a pre-fabricated, knock-down kit for field assembly
• Sidelite & transom glass ship separately in a dedicated crate for field glazing
• Head sill flashing and bottom sill channel included for water intrusion protection
• Installation instructions included