Key Features

• Nominal door size: 40" x 86" (RH handing)
• Application-specific design for exterior block / CMU wall openings
• Pre-glazed 1/4" tempered safety glass for commercial use
• ADA & IBC compliant storefront door package
• Grade 1 UL Listed, ANSI/BHMA certified hardware throughout
• Architectural clear anodized rails and stiles

What’s Included (Pre-Installed / Packaged)

• Alumitrex™ storefront door leaf, RH, 40" x 86"
• 1/4" tempered safety glass, factory pre-glazed with glazing vinyl
• Heavy-wall aluminum rails/stiles (clear anodized)
• Heavy-duty deadbolt (Grade 1, UL Listed, ANSI/BHMA certified)
• ADA hydraulic door closer (Grade 1, UL Listed, ANSI/BHMA A156.4 compliant)
• Heavy-duty pivot hinges (top and bottom; ANSI/BHMA certified)
• Solid aluminum pull (interior) and push bar (exterior) set (ANSI/BHMA A156.6 compliant)
• Fastener kit for storefront hardware components

All primary hardware components are Grade 1, UL Listed, and ANSI/BHMA certified.

Compliance & Certifications

• ADA compliant clearances and operability
• IBC compliant storefront entrance assembly
• UL Listed and ANSI/BHMA Grade 1 hardware
• Commercial tempered safety glass

Wall Type & Mounting (Exterior Block / CMU Wall)

Designed for CMU/masonry block substrates. Installation uses masonry-appropriate anchors at jambs and threshold (selected by the installer to match block density and site conditions). Ensure substrate is plumb, level, and structurally sound prior to installation.

• Anchor with masonry fasteners at manufacturer-recommended points
• Shim to maintain plumb, level, and square during fastening
• Seal perimeter with commercial-grade backer rod and sealant
• Verify smooth swing and ADA approach clearances

Dynabolts for CMU/block wall anchoring are not included, allowing contractors to select the ideal diameter and embedment for the project’s specific block conditions and the most secure installation.

Specifications

• Door Size: 40" x 86"
• Handing: RH
• Glazing: 1/4" tempered safety glass, pre-glazed
• Finish: Clear anodized aluminum
• Hardware: Grade 1 UL Listed, ANSI/BHMA certified (closer, deadbolt, pivots, pull/push hardware)
• Use: Exterior storefront entries in block / CMU wall construction
• Origin: Made in USA
• Lead Time: 3–4 week production

Quality & Packaging

• Factory pre-glazing and hardware prep to reduce install time
• Protective wrapping and heavy-duty crating for freight transit
• Installation instructions included

Notes

• Verify rough opening and block condition prior to ordering
• Coordinate threshold/transition with exterior grade and waterproofing
• Site conditions may require alternate anchors or sealants (by installer)