Key Features

• Nominal door size: 42" x 80" (LH handing)
• 1" Low-E insulated glass unit (IGU), double-paned, tempered safety glass, factory pre-glazed
• ADA & IBC compliant storefront entrance assembly
• Grade 1 UL Listed, ANSI/BHMA certified hardware throughout
• Architectural clear anodized rails and stiles (heavy-wall aluminum)
• Designed for exterior pre-cast concrete wall openings

What’s Included (Pre-Installed / Packaged)

• Alumitrex™ storefront door leaf, LH, 42" x 80"
• 1" Low-E double-paned IGU with tempered safety glass, factory pre-glazed with glazing vinyl
• Heavy-wall aluminum rails/stiles (clear anodized)
• Heavy-duty deadbolt (Grade 1, UL Listed, ANSI/BHMA certified)
• ADA hydraulic door closer (Grade 1, UL Listed, ANSI/BHMA A156.4 compliant)
• Heavy-duty pivot hinges (top and bottom; ANSI/BHMA certified)
• Solid aluminum pull (interior) and push bar (exterior) set (ANSI/BHMA A156.6 compliant)
• Fastener kit for storefront hardware components

All primary hardware components are Grade 1, UL Listed, and ANSI/BHMA certified.

Energy & Glazing Performance

• 1" Low-E IGU boosts thermal efficiency and occupant comfort
• Tempered panes for commercial safety and durability
• Factory glazing for consistent fit and weather resistance

Compliance & Certifications

• ADA compliant approach, clearances, and operability
• IBC compliant storefront entrance assembly
• UL Listed and ANSI/BHMA Grade 1 hardware
• Tempered safety glass for code-compliant commercial storefronts

Wall Type & Mounting (Exterior Pre-Cast Concrete)

Designed for pre-cast concrete panels (solid or sandwich) with appropriate structural backup. Typical installation uses concrete-rated anchors or embedded inserts at jambs and threshold, coordinated with the project’s structural details. Ensure the substrate is plumb, level, and structurally sound prior to installation.

• Anchor at manufacturer-recommended points; verify embedment and edge distances
• Shim to maintain plumb, level, and square alignment
• Coordinate flashing, WRB transitions, and sealant continuity at perimeter
• Verify smooth swing and ADA approach clearances

Concrete anchors are not included, allowing installers to select the correct type, diameter, and embedment to meet panel design and engineer requirements.

Specifications

• Door Size: 42" x 80"
• Handing: LH
• Glazing: 1" Low-E double-paned IGU, tempered safety glass, pre-glazed
• Finish: Clear anodized aluminum
• Hardware: Grade 1 UL Listed, ANSI/BHMA certified (closer, deadbolt, pivots, pull/push hardware)
• Use: Exterior storefront entries in pre-cast concrete wall construction
• Origin: Made in USA
• Lead Time: 3–4 week production

Quality & Packaging

• Factory pre-glazing and hardware preparation to minimize installation time
• Protective wrapping and heavy-duty crating for freight transit
• Installation instructions included

Notes

• Verify rough opening dimensions, panel thickness, and backup structure prior to ordering
• Coordinate threshold transition and waterproofing details with site conditions
• Site conditions may require alternate anchors or sealants (by installer)