Key Features

• Nominal door size: 42" x 80" (RH handing)
• 1" Low-E insulated glass unit (IGU), double-paned, tempered safety glass, pre-glazed
• ADA & IBC compliant storefront entrance assembly
• Grade 1 UL Listed, ANSI/BHMA certified hardware throughout
• Architectural clear anodized rails and stiles (heavy-wall aluminum)
• Designed specifically for exterior brick wall openings

What’s Included (Pre-Installed / Packaged)

• Alumitrex™ storefront door leaf, 42" x 80", RH
• 1" Low-E double-paned IGU with tempered safety glass, factory pre-glazed with glazing vinyl
• Heavy-wall aluminum rails/stiles (clear anodized)
• Heavy-duty deadbolt (Grade 1, UL Listed, ANSI/BHMA certified)
• ADA hydraulic door closer (Grade 1, UL Listed, ANSI/BHMA A156.4 compliant)
• Heavy-duty pivot hinges (top and bottom; ANSI/BHMA certified)
• Solid aluminum pull (interior) and push bar (exterior) set (ANSI/BHMA A156.6 compliant)
• Fastener kit for storefront hardware components

All primary hardware components are Grade 1, UL Listed, and ANSI/BHMA certified.

Energy & Glazing Performance

• 1" Low-E IGU reduces heat gain/loss and improves occupant comfort
• Tempered panes for commercial safety and durability
• Factory glazing for consistent fit and weather-resistance

Compliance & Certifications

• ADA compliant approach, clearances, and operability
• IBC compliant storefront entrance assembly
• UL Listed and ANSI/BHMA Grade 1 hardware
• Tempered safety glass suitable for commercial storefront use

Wall Type & Mounting (Exterior Brick Wall)

Designed for brick masonry substrates (solid brick or brick veneer over structural backup). Typical installation uses masonry-appropriate anchors at jambs and threshold (selected by the installer to match site conditions). Ensure the substrate is plumb, level, and structurally sound prior to installation.

• Anchor with masonry fasteners at manufacturer-recommended points
• Shim to maintain plumb, level, and square during fastening
• Seal perimeter with commercial-grade backer rod and sealant; coordinate flashing with sill/threshold
• Verify smooth swing and ADA approach clearances

Masonry anchors are not included, allowing contractors to select the proper diameter and embedment for the project’s brick and backup conditions.

Specifications

• Door Size: 42" x 80"
• Handing: RH
• Glazing: 1" Low-E double-paned IGU, tempered safety glass, pre-glazed
• Finish: Clear anodized aluminum
• Hardware: Grade 1 UL Listed, ANSI/BHMA certified (closer, deadbolt, pivots, pull/push hardware)
• Use: Exterior storefront entries in brick wall construction
• Origin: Made in USA
• Lead Time: 3–4 week production

Quality & Packaging

• Factory pre-glazing and hardware prep to reduce install time
• Protective wrapping and heavy-duty crating for freight transit
• Installation instructions included

Notes

• Verify rough opening, brick condition, and backup structure prior to ordering
• Coordinate threshold transition with exterior grade and waterproofing details
• Site conditions may require alternate anchors or sealants (by installer)