Key Features

• Application-specific design for exterior block wall openings
• 1/4" tempered safety glass (pre-glazed)
• 10" ADA bottom rail for cane-detection and accessibility
• Clear anodized architectural finish
• ADA & IBC compliant door package
• Grade 1 UL Listed, ANSI/BHMA certified hardware throughout

What’s Included (Pre-Installed / Packaged)

• Alumitrex™ storefront door leaf, 42" x 80", LH handing
• 1/4" tempered safety glass, pre-glazed with glazing vinyl
• 10" ADA bottom rail + matching top rail and stiles (clear anodized)
• Heavy-duty deadbolt (Grade 1, UL Listed, ANSI/BHMA certified)
• ADA hydraulic door closer (Grade 1, UL Listed, ANSI/BHMA A156.4 compliant)
• Heavy-duty pivot hinges (top and bottom; Grade 1, ANSI/BHMA certified)
• Solid aluminum pull (interior) & push bar (exterior) set (ANSI/BHMA A156.6 compliant)
• Fastener kit and mounting hardware for storefront components

All primary hardware components are Grade 1, UL Listed, and ANSI/BHMA certified. Package ships prepped for swift field installation into exterior block wall openings.

Compliance & Certifications

• ADA compliant clearances and operability (including 10" bottom rail)
• IBC compliant storefront entrance assembly
• UL Listed and ANSI/BHMA Grade 1 hardware components
• Commercial tempered safety glass for storefront use

Wall Type & Mounting (Exterior Block Wall)

Designed for CMU/masonry block substrates. Typical installation uses masonry-appropriate anchors at the jambs and threshold area (contractor-furnished to match site conditions). Ensure substrate is plumb, level, and structurally sound prior to installation.

• Shim and anchor at manufacturer-recommended points
• Seal perimeter with commercial-grade backer rod and sealant
• Verify smooth, unobstructed swing and ADA approach clearances

Dynabolts for CMU/block wall anchoring are not included, allowing contractors to select the proper length and diameter to match jobsite conditions for the most secure installation.

Specifications

• Nominal Size: 42" x 80"
• Handing: LH
• Glazing: 1/4" tempered safety glass, pre-glazed
• Rails/Stiles: Heavy-wall aluminum, 10" ADA bottom rail
• Finish: Clear anodized
• Hardware: Grade 1 UL Listed, ANSI/BHMA certified (closer, deadbolt, pivots, pull/push hardware)
• Use: Exterior storefront entries in block (CMU/masonry) wall construction
• Origin: Made in USA
• Lead Time: 3–4 week production

Quality & Packaging

• Factory pre-glazing and hardware preparation to reduce install time
• Protective wrapping and crating for freight transit
• Installation instructions included

Notes

• Verify rough opening and wall construction prior to ordering
• Site conditions may require alternate anchors or sealants (by installer)