Offset Pull Handle Pair With Back To Back Mounting Hardware In Dark Bronze Anodized Finish For Amarlite Storefront Door
Tahoma storefront door pull handles are designed to mount to Amarlite storefront door. Each Tahoma pull handle is commercial grade and manufactured from 1" diameter solid aluminum, so bending or denting will not occur even on the most abusive storefront entrance doors. Tahoma storefront door pull handles are class 1 anodizing providing an overall finish protection as well as UV protection.
ADA, or the American Disabilities Act, was a law passed in 1990 to ensure equal accessibility for all. The guidelines must be followed by all commercial buildings. Unfortunately, in today's market there are many imported pull handles and push bars being offered for very inexpensive prices, that do not meet the ADA guidelines. This is most likely because they are manufactured in countries which do not follow or have these guidelines set into place. If you are a building owner or contractor, when you purchase a Tahoma storefront door handle, you can have the peace of mind knowing that our products are ADA compliant and Building Code Compliant.
The Tahoma storefront door offset pull handle can be retrofitted to replace any existing storefront door offset pull handle. Tahoma offset pull handles come in the 3 standard center to center mounting measurements used in the storefront door industry, which are 9", 10", and 12". If your storefront door has an oddball center to center measurement, then a standard Tahoma offset pull handle can still be installed by simply drilling new center to center holes in the door stile. The old, existing mounting holes from the non-standard pull handle can be filled with bondo and then re-sprayed with touch up paint.
Offset Pull Handle Features
- Offset Pull Handle Set With Back to Back Mounting
- Standard 9", 10", or 12" Center To Center Handles
- For Use On Commercial Aluminum Storefront Doors
- 3-1/4" Offset
- 2-1/4" Projection
- 2-1/4" Door Clearance
- Back To Back Mounting Hardware Included
- 1" Diameter Solid Aluminum
- Class 1 Anodized Finish
Center To Center Measurment
The center to center measurement is the distance between the centerline of the top portion of the pull handle and the bottom portion. Refer to the product image for an illustration.
Back To Back Mounting
Back to back mounting hardware is standard allowing the exterior door side pull handle to attach through the storefront door lock stile and connect to the interior door side pull handle.