DC USA Approved 2190 Dual Force Interconnected Deadbolt/Deadlatch for Aluminum Doors (2190)
The 2190 Series Interconnected Deadbolt/Deadlatch provides
access control and security for narrow stile aluminum (2190),
hollow metal and wood doors (2290). Deadlatch and deadbolt
capabilities are combined for fast, easy, and panic-proof exiting.
The Dual Force combines the access control capabilities of a latch with
the security of a deadbolt. The key retracts and extends the deadbolt and
deadlatch from either side. The exterior lever retracts the latch only. With the
deadbolt projected, a simple turn of the inside lever retracts both the latch
and deadbolt simultaneously, providing single-motion, panic-proof exiting.
The Dual Force is available with electrified trim set for easy integration
into an existing access control system. Standard trim set, electrified
trim set, low profile trim set designed for out-swinging doors only.
Key or thumbturn projects or retracts deadbolt or deadlatch. Lock
accepts any standard 1" [25.4 mm] length, 1-5/32" [29.4 mm] diameter
mortise cylinder with MS® cam such as the 4036 Mortise Cylinder,
available separately. Lock accepts cylinder from either or both sides.
Inside lever retracts both deadbolt and deadlatch when configured with
interconnect feature. Outside lever retracts latch only. Latch holdback feature
activated or deactivated by turning key to retract latch. Sliding holdback button
on faceplate down will holdback latch and sliding up will release. The 2190 Series
Interconnected Deadbolt/Deadlatch are designed to operate with the uniquely
designed strike plate that comes standard in the package from the factory.
1-1/8" [28.6 mm] or 1-1/2" [38.1 mm] only.
Latchbolt: 5/8" [15.9 mm] throw of solid brass.
Easily reversible using only a screwdriver.
Deadbolt: 1" [25.4mm] throw of stainless steel.
Auxiliary Deadlatch Pin
Stainless steel. Deadlocks latchbolt to
prevent “loiding” or case-knife entry.
Includes faceplate system that adapts
to flat, radius, or beveled door edge.
The Dual Force 2190, 2290 Interconnected
Deadbolt/Deadlatch will not operate
without its specially designed strike,
included standard in package.
- 2190: Measures 1" x 6-7/8"
[25.4 mm x 174.6 mm]. Radius with
weatherseal faceplate available separately.
- 2290: Measures 1-1/4" x 8"
[31.8 mm x 203.2 mm].
Field-selectable inter-connection feature
allows interior trim to retract deadbolt
and deadlatch. Consult local authority
having jurisdiction (AHJ) for guidance
in code compliance. 1-3/4" [44.5 mm]
minimum door thickness required.
- 2190: Standard strike furnished is the 2101-01
Strike for flat jamb where door closes flush
or nearly flush. The 2101 Strike covers MS®
Deadlock strike preparation with modification,
and the 4901 Deadlatch Strike directly. Also
available in radius version for opposite
stile pairs of doors and with extended
lip strikes for special jamb conditions.
- 2290: Standard strike furnished is the
2206 (ASA) Strike for flat jamb where
door closes flush or nearly flush.
Individually boxed with trim as specified,
strike and machine screws for mounting.
Cylinder available separately.
- 2190 retrofits to existing MS1850S
Deadlock or 4500 and 4900
Deadlatch of the same backset.
9 lbs [4.08 kg].
Electrified Trim Options
Electrified trim set is designed for easy
integration into an existing access control
system. Dual-voltage 12/24 VDC rated for
continuous duty operation. Energizing
the trim set allows the exterior lever to
be turned to retract the latch only.
The electrified option is not available for
low profile trim (trim option 3). Dual Force
2190/2290 Electrification Kit EK-2190
available separately for field-installation
into the exterior standard trim set.
- Specify trim option, lever
style, finish, and strike.
- Thick Door Kits (2190-TDKXX) available
separately. Specify door thickness.
- Request to Exit REX-4600 switch
available separately for small
format low profile trim set.
- Available in choice of US3 (605)
Bright brass, US4 (606) Satin brass,
10B powder coat to match dark
bronze, US32 (629) Bright stainless,
or US32D (630) Satin stainless.