DC USA Approved 5017 Deadlock/Deadlatch for Wood Doors
5017 Deadlock/Latch provides the strength and deeper backset required to secure sliding wood doors.
For wood framed sliding doors, the 5017 Wood Door Deadlock/Latch provides the same 1000 lbs strength that the MS1847 Deadlock/Latch provides for metal stiles. A deeper backset clears the recessed jamb used with wood doors. The bolt throw is easily adjusted by means of a screw in the faceplate. Mounting is by throughbolts,which also secure the inside turn and outside cylinder when installed.
45° rotation of turn or key projects or retracts bolt. Bolt is self- protecting: if door is shut while bolt is extended, it will retract, preventing damage or accidental lock-out. Cylinder pulls available separately for keyed operation.
Cylinder Backset: 1-3/16" [30.2 mm]; 1-1/4" [31.8 mm] including faceplate.
Case: Measures 1/2" x 4" x 1-19/32" deep [12.7 mm x101.6 mm x 40.5 mm deep]. Stainless steel.
Bolt: Three-ply laminated stainless steel.
Cylinder Pull: (4026 Pull) Five pin tumbler cylinder in zinc alloy housing. Standard finish 130 Satin Aluminum.
Lock: Stainless steel, 5/8" x 4-1/2" [15.9 mm x 114.3 mm] with radiused ends.
Turn: 1015 Turn available with 1016 blank plate shown for doors from 5/6" [21.2 mm] to 2-1/4" [57.2 mm] thickness. Without blank plate turn available (for use with cylinder pull) on doors from 1-7/16" [36.5 mm] to 2" [50.8 mm] thickness. Standard finish 130, Satin Aluminum enamel.
Standard Package: Cylinder pull available separately.
Shipping weight: 1/2 lb [0.23 kg].
• 1015 Turn for inside operation is available alone (for use with 4026 cylinder pull on outside) or with a blank 1016 outside trim plate and binder posts (when cylinder is not required).
• 4810 Box Strike with woodscrews available separately.