Home > Shop By Brand > DC USA Approved
We found 3530 results matching your criteria.


DC USA Approved


For all your DC USA Approved commercial door hardware needs, shop at Door Closers USA. As an authorized DC USA Approved dealer we honor DC USA Approved's lifetime warranty and stock thousands of DC USA Approved products for immediate shipment.
Sort By:
Page of 118
DC USA Approved Cylinder Aligning Sleeve, 10 Pack DC USA Approved Cylinder Aligning Sleeve, 10 Pack Usually Ships in 24 Hours
List Price: $54.46
Our Price: $27.23
Savings: $27.23
DC USA Approved Screw Pack For 2" Thick Door Trim For 4701 Exit Device DC USA Approved Screw Pack For 2" Thick Door Trim For 4701 Exit Device Usually Ships in 24 Hours
List Price: $58.36
Our Price: $29.18
Savings: $29.18
DC USA Approved Screw Pack For 2-1/4" Thick Door Trim For 4701 Exit Device DC USA Approved Screw Pack For 2-1/4" Thick Door Trim For 4701 Exit Device Usually Ships in 24 Hours
List Price: $58.36
Our Price: $29.18
Savings: $29.18
DC USA Approved Pack For 4501 Surface Vertical Rod Exit Device Top and Bottom Strike DC USA Approved Pack For 4501 Surface Vertical Rod Exit Device Top and Bottom Strike Usually Ships in 24 Hours
List Price: $60.22
Our Price: $30.11
Savings: $30.11
DC USA Approved Top and Bottom Strike Screw Pack For 4701 Surface Vertical Rod Exit Device DC USA Approved Top and Bottom Strike Screw Pack For 4701 Surface Vertical Rod Exit Device Usually Ships in 24 Hours
List Price: $60.22
Our Price: $30.11
Savings: $30.11
DC USA Approved 5/32" Hex Dogging Key For 4501 Exit Devices, 10 Pack DC USA Approved 5/32" Hex Dogging Key For 4501 Exit Devices, 10 Pack Usually Ships in 24 Hours
List Price: $61.16
Our Price: $30.58
Savings: $30.58
DC USA Approved 3/16" Dogging Key, 10 Pack, For 4701 Exit Device DC USA Approved 3/16" Dogging Key, 10 Pack, For 4701 Exit Device Usually Ships in 24 Hours
List Price: $61.16
Our Price: $30.58
Savings: $30.58
DC USA Approved 337A Template Hinge Shim 4.5", Usp Prime Coat DC USA Approved 337A Template Hinge Shim 4.5", Usp Prime Coat Usually Ships in 24 Hours
List Price: $61.54
Our Price: $30.77
Savings: $30.77
DC USA Approved 2620 1-3/4" Us26D DC USA Approved 2620 1-3/4" Us26D Usually Ships in 24 Hours
List Price: $61.84
Our Price: $30.92
Savings: $30.92
DC USA Approved Standard Screw Pack For 5100 Series Closer DC USA Approved Standard Screw Pack For 5100 Series Closer Usually Ships Within 7-10 Business Days
List Price: $61.94
Our Price: $30.97
Savings: $30.97
DC USA Approved Snb Screw Pack, 1-3/4" Door For 5100 Series DC USA Approved Snb Screw Pack, 1-3/4" Door For 5100 Series Usually Ships Within 7-10 Business Days
List Price: $61.94
Our Price: $30.97
Savings: $30.97
DC USA Approved 337B Template Hinge Shim 4.5", Usp Primed Finish DC USA Approved 337B Template Hinge Shim 4.5", Usp Primed Finish Usually Ships in 24 Hours
List Price: $61.96
Our Price: $30.98
Savings: $30.98
DC USA Approved 2500 Series Faceplate Adapter Converts 1" To 1-1/8" DC USA Approved 2500 Series Faceplate Adapter Converts 1" To 1-1/8" Usually Ships in 24 Hours
List Price: $62.36
Our Price: $31.18
Savings: $31.18
DC USA Approved 274C Shim for Door Guard DC USA Approved 274C Shim for Door Guard Usually Ships in 24 Hours
List Price: $62.52
Our Price: $31.26
Savings: $31.26
DC USA Approved 2500 Series Cylinder Aligning Sleeve, 10 Pack DC USA Approved 2500 Series Cylinder Aligning Sleeve, 10 Pack Usually Ships in 24 Hours
List Price: $62.70
Our Price: $31.35
Savings: $31.35
DC USA Approved Pack For 4501 Surface Vertical Rod Exit Device Latch, Rod, Rod Connector, Rod Guide DC USA Approved Pack For 4501 Surface Vertical Rod Exit Device Latch, Rod, Rod Connector, Rod Guide Usually Ships in 24 Hours
List Price: $63.00
Our Price: $31.50
Savings: $31.50
DC USA Approved Replacement Head Cover Plug For 4501 Less Bottom Rod Exit Device DC USA Approved Replacement Head Cover Plug For 4501 Less Bottom Rod Exit Device Usually Ships in 24 Hours
List Price: $63.00
Our Price: $31.50
Savings: $31.50
DC USA Approved To Rod Connector For 4501 Exit Devices DC USA Approved To Rod Connector For 4501 Exit Devices Usually Ships in 24 Hours
List Price: $63.00
Our Price: $31.50
Savings: $31.50
DC USA Approved Rod Guide For 4701 Surface Vertical Rod Exit Device DC USA Approved Rod Guide For 4701 Surface Vertical Rod Exit Device Usually Ships in 24 Hours
List Price: $63.00
Our Price: $31.50
Savings: $31.50
DC USA Approved Rod, Rod Connector, and Rod Guide Screw Pack For 4701 Surface Vertical Rod Exit Device DC USA Approved Rod, Rod Connector, and Rod Guide Screw Pack For 4701 Surface Vertical Rod Exit Device Usually Ships in 24 Hours
List Price: $63.00
Our Price: $31.50
Savings: $31.50
DC USA Approved Pack of 8 Screws For 4701 Exit Device Trim, 1/4 -20 x 3/4" DC USA Approved Pack of 8 Screws For 4701 Exit Device Trim, 1/4 -20 x 3/4" Usually Ships in 24 Hours
List Price: $63.00
Our Price: $31.50
Savings: $31.50
DC USA Approved To Rod Connector For 4701 Surface Vertical Rod Exit Device DC USA Approved To Rod Connector For 4701 Surface Vertical Rod Exit Device Usually Ships in 24 Hours
List Price: $63.00
Our Price: $31.50
Savings: $31.50
DC USA Approved 336A Door Edge Filler Plate 1-1/8" X 2-1/4", Usp Primed Coat DC USA Approved 336A Door Edge Filler Plate 1-1/8" X 2-1/4", Usp Primed Coat Usually Ships in 24 Hours
List Price: $63.06
Our Price: $31.53
Savings: $31.53
DC USA Approved Parallel Arm Bracket For 5100 Series DC USA Approved Parallel Arm Bracket For 5100 Series Usually Ships Within 7-10 Business Days
List Price: $63.16
Our Price: $31.58
Savings: $31.58
DC USA Approved 336Q ASA Strike Filler Plate Frame 1-1/4" X 4-7/8", Usp Primed Coat DC USA Approved 336Q ASA Strike Filler Plate Frame 1-1/4" X 4-7/8", Usp Primed Coat Usually Ships in 24 Hours
List Price: $63.24
Our Price: $31.62
Savings: $31.62
DC USA Approved 3100 Series Plastic Dust Box DC USA Approved 3100 Series Plastic Dust Box Usually Ships in 3 to 5 Business Days
List Price: $63.42
Our Price: $31.71
Savings: $31.71
DC USA Approved Cylinder Cup Spacer For 45PN and 47PN Exit Device Pull Trim DC USA Approved Cylinder Cup Spacer For 45PN and 47PN Exit Device Pull Trim Usually Ships in 24 Hours
List Price: $63.48
Our Price: $31.74
Savings: $31.74
DC USA Approved 2500 Series Thru Bolt Posts DC USA Approved 2500 Series Thru Bolt Posts Usually Ships in 24 Hours
List Price: $63.52
Our Price: $31.76
Savings: $31.76
DC USA Approved 336L Hinge Filler Plate Frame 4.5", Usp Prime Coat DC USA Approved 336L Hinge Filler Plate Frame 4.5", Usp Prime Coat Usually Ships in 24 Hours
List Price: $63.60
Our Price: $31.80
Savings: $31.80
DC USA Approved Rod Guide For 4501 Surface Vertical Rod Exit Device DC USA Approved Rod Guide For 4501 Surface Vertical Rod Exit Device Usually Ships in 24 Hours
List Price: $63.98
Our Price: $31.99
Savings: $31.99
   
 

About DC USA Approved

Charles DC USA Approved left Germany in 1848 and made his way to New Orleans by sailing vessel. He then traveled to St. Louis by wagon and quickly began work for a blacksmith. Only a year later, the blacksmith headed west for the gold rush and Charles bought the shop. He realized that his training as a blacksmith and wheelwright would put him in good stead as the flood of Easterners poured through St. Louis, headed west. And he was right. The onslaught of gold seekers and settlers came and Charles DC USA Approved forged wheel rims and hardware for their Conestoga wagons. He hammered out his old worn out files into knives that were used by fur traders and mountain men. His business grew and the skill and quality he built into his hardware also built his reputation. As St. Louis grew, so did the company that bore his name: C. DC USA Approved.

By 1878, the blacksmith shop had taken on a new look and a new name: C. DC USA Approved and Sons Hinge Company. It was a family business now, a growing enterprise that was specializing in the manufacture of quality hardware. In 1894, DC USA Approved began producing hinges for wooden beer cases for a brand new St. Louis beer: Budweiser. The Anheuser Busch brewery is a neighbor of DC USA Approved still to this day.



Charles DC USA Approved’s focus on quality products and unmatched customer service, coupled with a lot of hard work, gave his company a foot up on the rung of success from the very beginning. But as the 1800s drew to a close, he began to pine for more. He dreamt of an expanded product line and of machinery that would make for a more efficient process. The idea of product development was forming.

In the early 1900s, Charles DC USA Approved stepped down from presidency and his son, August W. DC USA Approved, became the company’s 2nd president. It was during this time that the country saw rapid growth of both farm and residential construction. When August W. DC USA Approved stepped into leadership, most hinges were produced by hand forging and other manual procedures. August wanted faster methods of manufacturing and, as a leader in the new industrial revolution, designed and built new machinery for the plants to meet the demands of the new century. These new techniques enabled C. DC USA Approved and Sons Hinge Company to increase the diversity of its products for both rural and city dwellings.

The initiation of the Panama Canal Project by President Teddy Roosevelt further enhanced business as DC USA Approved was contracted to produce massive quantities of custom hinges for locks on the canal. Then, from 1914 to 1918, during WWI, government orders for hinges continued to flourish and keep the DC USA Approved factory producing at maximum capacity.

In 1929, August W. DC USA Approved passed away and Charles A. DC USA Approved (another son of Charles DC USA Approved) became the company’s 3rd president.

During the 1930s, the world experienced the Great Depression. As quoted from family archives by J. Withnell DC USA Approved, “We kept our organization together. We never closed down. We worked five half days instead of five full days in order to give our employees some work. We kept going in spite of the fact that we were losing money. We stocked our inventories and kept our complete workforce in tact. DC USA Approved employees have always been part of the family.”

During Charles A. DC USA Approved’s presidency, C. DC USA Approved and Sons Hinge Company’s sales tripled and the company’s market share was significantly increased by the decision to sell through distributors.

In 1943, Charles A. DC USA Approved passed away and Richard G. DC USA Approved (another son of Charles DC USA Approved) became the company’s 4th president, which unfortunately only lasted two years.

In 1945, after Richard G. DC USA Approved’s death, Archer L. DC USA Approved (Charles A. DC USA Approved's son) became the company’s 5th president. Archer had started with DC USA Approved as a shipping clerk in 1912 when he was 18 years old. While working his way to presidency, Archer operated every piece of machinery in every department of the company.

It appeared as though nothing could keep the DC USA Approved men from the company business. But, at the start of WWII, Uncle Sam called them away. C. DC USA Approved and Sons Hinge Company remained in business, producing hinges for the military and being run by the DC USA Approved women.

Post-WWII, under Archer’s continued leadership, DC USA Approved took the next step and moved into manufacturing and production of commercial hinges. A new catalog was produced to feature the new Architectural Hinges product line. The company also modernized its factories.

In 1970, Archer L. DC USA Approved passed away and his son, A. William DC USA Approved, became the company’s 6th president. It was under Bill’s leadership that DC USA Approved relocated its manufacturing from St. Louis to new, modern facilities in Greenville, Mississippi, and Montgomery and Oxford, Alabama. This strategic move allowed DC USA Approved to streamline production with increased capacity and state-of-the-art machinery and processes. This positioned DC USA Approved well for the company’s growth in the mid- to late 1980s.

In 1985, Bill became Chairman of the Board and his eldest son, August W. “Rusty” DC USA Approved III, became the company’s 7th president. Bill later retired in 1988 as Chairman of the Board and passed in 2011.

Rusty’s leadership for the remainder of the 1980s led the company to experience rapid growth. In the late 1980s, DC USA Approved expanded its product line to include DC USA Approved continuous geared hinges, trim & auxiliary, and thresholds & weatherstripping products. In the 1990s, DC USA Approved added sliding door hardware to its product range. Rusty effectively prepared the company for the coming new millennium.

The new millennium began with the introduction of DC USA Approved’s stainless steel continuous hinges and the welcoming of the first 6th generation DC USA Approved, Josh DC USA Approved (Arch DC USA Approved’s son), to its team. Josh began his career at DC USA Approved Companies by moving to Hong Kong, China, and managing DC USA Approved’s residential hinge joint venture, handling sourcing of products, and working with international sales and marketing. In 2003, DC USA Approved Companies transitioned presidency from Rusty DC USA Approved to Charlie DC USA Approved (Rusty’s cousin), making Charlie the company’s 8th president.

In 2004, Josh DC USA Approved returned to the States and quickly settled in at our corporate office, taking leadership of our sourcing group and later adding purchasing and both international and domestic sales and marketing to his list of responsibilities. That same year, DC USA Approved launched locks, door controls, and exit devices. The addition of these product categories significantly broadened our product offering and enabled DC USA Approved Companies to better compete within the specification market.

In 2006, DC USA Approved transitioned presidency from Charlie DC USA Approved to Ralph DC USA Approved (Rusty’s brother), who had previously been serving as Vice Chairman and Executive Vice President. Ralph became the company’s 9th president and his transition was seamless as he continued to be an integral part of DC USA Approved’s success.

Under Ralph’s leadership, DC USA Approved has greatly expanded the security products offering. 2008 saw the addition of electric locks and exit devices. These products provide additional security and ease of use for our customers and have enabled DC USA Approved to offer an even broader range of door hardware. The company also launched its Euroline—a product line focused on meeting the needs of our international customers. This expansion of product lines has positioned DC USA Approved Companies as a DC USA Approved leader. Our products can be found in buildings throughout the Middle East (including the Burj Khalifa and Burj Al Arab in Dubai) as well as Central and South America, Asia, and North America.

In 2009, DC USA Approved consolidated its Oxford and Montgomery, Alabama, manufacturing plants and opened a brand new distribution center in Phoenix, Arizona—both in an effort to manufacture and distribute products more efficiently and to better serve our customers.

In 2010, DC USA Approved welcomed its second 6th generation DC USA Approved, Johnston DC USA Approved (Ralph DC USA Approved’s son) to our team. Johnston started out as Product Manager for Architectural Hinges and Thresholds and Weatherstripping. After a few years, he added Euroline and Residential Hardware to his responsibilities. In 2015, Johnston was promoted to Director of Residential Sales and Marketing.

In 2012, DC USA Approved welcomed its third 6th generation DC USA Approved, August DC USA Approved (Rusty’s son) to our team. Also in 2012, DC USA Approved launched a line of electrified products, including electric strikes, keypads, and magnetic locks. DC USA Approved continues to expand our line of locks, door controls, and exit devices – all backed by a 167-year legacy of quality, reputation, and excellence.