Steel-Lite EX10 ADA Compliant ANSI Grade 1 Push Pad Panic Rated Exit Device With Entry Escutcheon Lever Handle Designed For Installation On Hollow Metal Doors

Steel-Lite EX10 exit devices provide safety to any commercial building. Our products are high quality and meet ADA and building code compliance.

Interior Or Exterior Door Use

Steel-Lite exit devices are expected to be used on interior or exterior commercial doors. The heavy duty exit device chassis allows the Steel-Lite exit device to withstand abuse in the busiest door ways, while also performing its function safely. The exit device features an auxiliary guarded latch design allowing the latchbolt to automatically deadlock after closing.

ADA Compliant

ADA, or the Americans With Disabilities Act, is a law passed in 1990 which includes commercial door requirements that ensure equal accessibility to all. Any ADA compliant door must use ADA compliant door hardware. Unfortunately, there are many exit devices on the market today that are not ADA compliant. With Steel-Lite, you will have the peace of mind knowing that the exit device you purchase is ADA and Building Code compliant.

ANSI Grade 1 - Tested & Exceeded 500,000 Door Cycles

ANSI, the American National Standards Institute, creates standards for the performance of commercial door exit devices and panic hardware. Steel-Lite exit device products surpass and exceed these standards. With Steel-Lite exit devices we have achieved the highest grade possible, a grade 1, meaning our exit device has exceeded over 500,000 door opening cycles. This means the Steel-Lite exit device will perform for many years on any commercial door. Unfortunately, there are many inferior exit device models on the market today that do not list an ANSI grade because they have not been tested or cannot qualify for a grade. These unlisted devices are not certified or compliant with ANSI, ADA, or Building Code requirements. Have the confidence knowing that Steel-Lite exit devices meet all ANSI, ADA, and Building Code requirements.

Includes

• Steel-Lite EX10 Rim Exit Device
• Steel-Lite EX10 Rim Strike
• Steel-Lite EX10 Entrance Function Escutcheon Lever Trim
• Hardware

Dimensions

• Stainless steel latch with 5/8" throw
• 2-3/4" backset
• Rim strike features slotted holes for easy adjustment

Installation

For replacing existing rim exit devices, the Steel-Lite EX10 exit device uses a universal backset of 2-3/4" allowing it to replace any existing rim exit device. Please note, rim exit device chassis vary between manufacturers. If replacing an existing rim exit device from another manufacturer, the Steel-Lite EX10 template may be necessary to screw and attach new mounting holes. For new installation the Steel-Lite exit device fits any hollow metal or commercial wood door with standard rim exit device prep. The Steel-Lite EX10 exit device can be used on doors 1-3/4" thick to 2" thick.

Features

• ADA Compliant
• ANSI A156.3 Compliant
• ANSI Grade 1 Exit Device - Tested & Exceeded Over 500,000 Opening Cycles
• UL Listed
• Non-Handed Design
• Heavy Duty Rated For Commercial Wear
• Designed To Withstand Heavy Foot Traffic and Abuse