Application-First Summary

• Environment: Interior
• Wall Type:New construction metal stud partitions – pre-drywall install
• Use Case: Corridors, offices, classrooms, storage & utility rooms in commercial/interior build-outs
• Finish: Prime Gray (ready for field topcoat)

Compliance & Listing Options

• NFPA 80 Fire-Rated Options: UL/cUL labeling available when furnished as a complete labeled assembly (door, frame, hardware) and installed per listing.
• ADA & IBC Alignment: Clear width, approach, operable parts, and closer force/speed when field-adjusted properly.
• Hardware Readiness: Factory preps available for ANSI/BHMA Grade 1 hinges, locks, exit devices, and closers.

Note: If a fire label is required, specify the rated core and listed components to match the UL procedure and local AHJ requirements.

Door Construction

• Size & Handing: 36" x 84", LHR (Left Hand Reverse).
• Skins:18-gauge galvannealed steel (A40/A60), prime painted.
• Core: Insulated or fire-rated core available per specification/listing.
• Edges & Reinforcements: Interlocked edges; reinforcement plates at hinges, lockset/exit device, and closer.
• Finish: Prime Gray for field topcoat to project color schedule.

Frame & Anchoring – New Construction Metal Stud (Pre-Drywall)

• Anchor Frame: Masonry-style frame supplied with metal stud anchors.
• Pre-Drywall Install: Set frame before gypsum board; plumb/square, anchor to studs, then board tight to frame returns.
• Factory Preps: Strike, silencers, hinge/closer backing aligned to hardware schedule and LHR handing.
• Clearances: Coordinated reveals target first-time fit and smooth inspection.

Options & Accessories

• Hardware Kits: Grade 1 hinges, locksets/exit devices, and closers available to match listing and ADA performance.
• Vision Lite / Louvers: Fire-rated glazing and listed louvers (where permitted by rating and location) available.
• Perimeter Seals & Thresholds: Smoke/draft seals and saddles for code-driven openings.

Performance Advantages

• Spec-Grade Build: 18-ga galvannealed skins with robust reinforcements.
• Inspection-Ready: UL/cUL documentation (when labeled) and clean, repeatable pre-drywall install sequence.
• USA Made: Consistent quality with 3–4 week standard production.

Key Specifications

Important Notes

• Confirm stud gauge/spacing, anchor type, and rough opening against approved shop drawings.
• Final ADA/IBC performance depends on field conditions (clearances, hardware selection, closer adjustments).
• Finish paint, glazing, and hardware kits furnished per quote—verify inclusions on your proposal.