Pair Configuration

• Active/Inactive:RH Reverse active leaf with locking function; inactive leaf prepped for flush bolts (surface or concealed as specified).
• Swing & Egress: Outswing/inswing configured to project requirements while supporting clear width and approach requirements.
• Hardware Prep: Reinforcements for ANSI/BHMA Grade 1 hinges, mortise or cylindrical lock on active leaf, closer, and strike preps; exit device prep available.

Door & Core Construction

• Skins: 18-gauge galvannealed steel, prime gray, paint-ready finish.
• Core: Polystyrene insulated core (standard) for rigidity and thermal performance.
• Edges & Seams: Interlocked, mechanically seamed edges with heavy backing plates at hardware locations.
• Weatherability: Prepped to receive thresholds, sweeps, and weatherstripping for exterior protection.

KD Punch & Dimple Masonry Frame

• Type: Knock-Down (KD) frame designed for CMU/block or brick openings.
• Anchorage: Punch & dimple anchor pattern for solid masonry; sleeve bolts/expansion anchors per project spec.
• Head/Jambs: Reinforced steel sections sized to opening; shipped in sections for easier handling and faster set.

Ratings & Compliance

• NFPA 80 Fire-Rated Options: 20/45/60/90/180-minute labels available when supplied as a complete labeled assembly.
• ADA & IBC: Clear opening width, approach, and operable parts supported when paired with appropriate hardware and field conditions.
• UL/cUL: Door, frame, and hardware preps compatible with UL-listed components for inspection-ready submittals.

Key Specifications