Storefront Aluminum Door Fixed Spring Size Concealed Closer Kit With Closer Body, Top Arm, and Bottom Pivot (Specify Options)
Includes
Concealed Closer Body
Concealed Closer Mounting Brackets
Top Arm
Bottom Pivot Set
Features
UL Listed UL10C and UBC 7.2 (1997) BS476 for positive pressure and Fire Safety (for non hold-open function)
Dual speed control valves for closing and latching speeds controlled by separate regulating valves, fully adjustable after installation.
Universal and non-handed for left or right door application
Installs in an aluminum storefront header or transom as small as 1-3/4" x 4"
Heavy duty positive cam centering for alignment and to hold door closed against normal wind or draft conditions.
Stable hydraulic door check fluid for any climactic operation and provides constant lubrication
Installation Types
Center Hung Door Application:Double or Single Acting (applied door stop renders unit Single Acting). Adjustable 'S' type side loading or 'A' type, 'K' type, and 'PT' type end loading arms are available for center pivoted door applications
Offset Hung Door ApplicationSingle Acting Offset 'JO' and 'VO' type top arms are available for butt hung or offset pivoted applications
Spring Tension / Door Size Option:
ADA 5lb Spring: For Interior 36" Door Applications With Less Than 5lb Opening Force
ADA 8.5lb Spring: For Exterior 36" Door Applications With Less Than 8.5lb Opening Force
Light Duty Spring: For Storefront Doors Up To 30" Wide and Up To 96" Tall
Regular Duty Spring: For Storefront Doors 31" To 41" Wide and Up To 96" Tall
Heavy Duty Spring: For Storefront Doors 42" To 48" Wide and Up To 96" Tall
Top Arm Options
"S" Side Load Arm: For Center Hung Door Application With 1/2" Top Rail Depth
"A" End Load Arm: For Center Hung Door Application With 1" Top Rail Depth
"K" End Load Arm: For Center Hung Door Application With 5/8" Top Rail Depth
"PT" End Load Arm: For Center Hung Door Application With 7/8" Top Rail Depth
"JO" Mortised Offset Slide Block Arm: For Offset Pivoted Door Application With 9/16" Top Rail Depth
"VO" Surface Offset Slide Block Arm: For Offset Pivoted Door Application With 7/8" Top Rail Depth
Bottom Pivot Set Options
"DP" Pivot Set: Adjustable Dual Purpose Radial Ball Bearing Bottom Pivot Set For Floor or Threshold Mounted (Side or End Loading Top Arm) Center Hung Installation.
"G" Adjustable Floor Mount Bottom Pivot Set
"GE" Adjustable Threshold Mount Bottom Pivot Set
Hold Open Function Option
This option allows you to add the hold open function to the door closer when it is in the full open position.
No Hold Open: Door closer will not hold open when pushed to the full open position
Hold Open: Door closer will hold open when pushed slightly past the full open position. When door is pulled back closed slightly, the door will release and close.
Backstop Function Option
This option allows you to select how far open you want the door closer to full open. We install a backstop inside of the door closer, so it will only open to the max open position you choose.
