Brush Astragal Door Seal Designed To Mount To The Center Of A Storefront Door Pair
Storefront door pairs are the most common front entry door type for most commercial buildings including hospitals, schools, banks, offices, and more. Unfortunately, the majority of storefront door pairs do not come well insulated and a visible gap between the two door panels exists. As a front entrance door it constantly faces changing weather from wind to rain, or even snow. Not to mention the debris and pests that often get into the building through any gaps in the door. The Tahoma storefront door astragal was designed specifically for aluminum front entrance door pairs. The heavy duty brush is designed for a firm seal between the doors, allowing no debris, wind draft, or pests to penetrate into the building. The brush is engineered to fit tightly into the aluminum holder, allowing the brush to not fall out even in the highest traffic storefront door applications.
Designed For Storefront Door Pairs
The heavy duty design of the Tahoma brush astragal will hold up in any front entry door application. The majority of astragals on the market are only designed for residential use with extremely low traffic, resulting in the brush falling out within a week of use if installed on a commercial storefront door. The Tahoma door astragal weatherstripping is made for storefront doors and will last for years in the highest traffic door applications.
Retrofitting An Astragal On A Storefront Door Pair
If your storefront door pair has a gap between the two doors, then this All American Astragal is perfect for your application. It is important to note that this product can be installed on any commercial storefront door pair, however some cutting of the astragal's aluminum door holder may be necessary if your aluminum door has hardware that is very close to the leading edge of the door. For example, some storefront doors are outfitted with pull handles that are mounted almost at the edge of the door. In these door applications, the Tahoma door astragal can still be surface mounted to the face of the door, but some cutting of the astragal aluminum holder will need to be completed in order to fit it around the uniquely mounted pull handle. Likewise trimming of the astragal door holder may also be necessary if your storefront door has any other kind of special prep located near the edge of the door.
Tahoma Door Astragal Features
- Heavy Duty Nylon Brush
- Reinforce Aluminum Holder
- Engineered Brush Design For Commercial Aluminum Storefront Door Use
- Fire Rated UL10B
- Positive Pressure UL10C
- Includes Mounting Hardware
