*Generic Image, Refer to Description for Model and Finish
36 in. x 84 in. (3070 CRS18BW) Right Hand Reverse 18 Gauge Cold Rolled Steel Commercial Door With Insulated Core, Masonry Block Wall 5-3/4 in. Knock Down Frame, Ball Bearing Hinges and Lever Handle, Made In USA
36 in. x 84 in. (3070 CRS18BW) Right Hand Reverse 18 Gauge Cold Rolled Steel Commercial Door With Insulated Core, Masonry Block Wall 5-3/4 in. Knock Down Frame, Ball Bearing Hinges and Lever Handle, Made In USA
Welcome to Door Closers USA your source for quality commercial steel doors and frames. Our CRS18 is constructed from heavy duty 18 gauge cold rolled steel. These doors are designed for installation in any commercial building. The 16 gauge cold rolled steel masonry block wall door frame is shipped in knock down form and assembles very easily. With our commercial steel doors you can ensure high quality doors and frames delivered to you right away.
Dimensions
Exact Frame Size: 40 in. Width x 86 in. Height
Recommended Rough Opening: 40-1/2 in. Width x 86-1/4 in. Height
Door Specifications
Insulated with polystyrene core
Cold Rolled Steel
7 gauge hinge reinforcements
Reinforced 161 lock prep
14 gauge door closer reinforcement (standard)
Meets ANSI standards
Universal 4-1/2" hinge prep
Made in USA
Painted In Prime Coat (Paint Ready)
Heavy duty 16 gauge vertical edge
Inverted top and bottom channel
Installed steel cap standard
Frame Specifications
Masonry Block Wall frames are available with mortar in wire anchors for new masonry block walls or punch and dimple existing opening anchors for existing block walls. These anchors provide a tight rigid fit in the opening.
16 Gauge for 1-3/4" doors
Precision fitted corners
Cold Rolled Steel
Painted In Prime Coat (Paint Ready)
7 Gauge hinge reinforcements
Heavy duty strike reinforcements
Meets ANSI standards
Universal 4-1/2" hinge prep
Includes
1 Each 36 in. x 84 in.18 Gauge Cold Rolled Steel Commercial Door With Polystyrene Insulated Core
1 Each 36 in. x 84 in. 16 Gauge Cold Rolled Steel Knock Down Frame with a 5-3/4" Jamb Depth
3 Each 4-1/2 in. x 4-1/2 in. Square Corner Ball Bearing Hinge, US26D Satin Chrome Finish