DC USA Approved ML19092 Electrified Motorized Storeroom Mortise Lock (Schlage L9000 Replica)
The DC USA Approved ML1 (L9000) retrofit series mortise lock utilizes a highquality Grade 1 chassis built to withstand years of use. You can install this lock withthe confidence of knowing that the ML1 carries our top tier features, options, andspecifications. The ML1 allows for field handing, it is field reversible (EL/EU). This mortise lock retrofits any Schlage L seriescompatible trim and may be purchase as chassis only or as a complete lockset.
Voltage:
Motorized Model 11-30V
Field Selectable Fail Safe (EL) or Fail Secure (EU)
Accessories:
Current Reduction Unit (CRU2) - 10-30V inputmanages power to efficiently control a 12 or 24Vsolenoid. Improve solenoid life in continuously onapplications.
Request to Exit (REX) - Available as a field installablekit or factory installed
Request to Exit By Pass (REXBPS) - Request to exit (REX)switch will be bypassed when the lock is in the unlockedstate, preventing false REX signals.
Latchbolt Monitor (LBM) - Monitor the position of thelatchbolt
Features:
Plug-in bridge rectifier that allows for an AC or DCpower source supplied with all locks
Low current draw
Handing Field Reversible
Recommended Locking Hardware Power Supplies:
PS204/PS204B
PS220/220B
PS480B
PS2
PS5-8
Models Available:
ML19092 - Motorized Storeroom: (fail safe/fail secure) Outside lever locked (EL) or unlocked (EU) electronically. Latchbolt retracted by key outside or lever inside. Applied power allows outside lever to retract latchbolt. Inside lever is always free for immediate egress.
ML19095 - Motorized Institutional:(fail safe/fail secure)Outside and inside levers simultaneously locked (EL) or unlocked(EU) electronically. Latchbolt retracted by key on either side. Appliedpower allows both levers to retract latchbolt.
Here To Serve You
Have Questions or Need Help?
Our specialists are just a phone call away. Call 866-232-5673 and we will gladly assist you!