Schlage L Series Electrified Latch Pullback Mortise Lock Replica | Sales: [email protected]

DC USA Approved LPM1 Electric Latch Pullback Mortise Lock (Schlage L Series Replica)

The DC USA Approved LPM1 series mortise lock utilizes a high quality Grade 1 chassis built towithstand years of abuse. This unique model brings latch retraction to a standard mortise lockset.Requiring no special door prep, this is the perfect solution for push-pull conditions, handicapaccess, and for automatic operators where panic devices are not necessary. The LPM1 takesadvantage of out patented PM300 technology, allowing for favourable wire runs and multiple lockson one power supply. It is field handible and available in Fail Secure (EU) functionality. This mortiselock uses standard ‘type 86’ door prep and can retrofit to Schlage L9000 compatible trim. We offerthis model as chassis only or with complete trim

Features:

• No special lock prep required – fits standard mortise pocket prepped for a Schlage “L” series lock
• Utilizes our patented PM/PWM technology
• Circuitry allow for momentary or continuously on “push/pull” applications
• Available is complete locksets or in chassis only (retrofits to Schlage “L” series compatible trim)
• Must be used with a DC USA Approved PS210,PS1, PS220/220B/ PS440B, or PS5-4 power supply
• 18 Ga+ wire required for power transfer device

Latchbolt Solenoid Specifications:

• Operating Voltage – 24 VDC (+/- 10%)
• Holding Current Amperage - 260mA@24VDC
• Surge Current Amperage - 1.9A for350ms@24VDC
• Peak Current - 7 A @ 24VDC
• Solenoid coil resistance – 1.75 Ω
• Wire gauge: Minimum 18 gauge
• 300’ with 18ga wire

Lever Solenoid Specifications:

• Operating Voltage – 24VAC/DC (+/- 10%)
• Amperage - 24v = 350mA
• Solenoid coil resistance – 24v = 69Ω

Recommended Locking Hardware Power Supplies:

• PS210
• PS1
• PS220/220B
• PS440B
• PS5-4

Options:

• REX - Request to Exit switch available
• LBM- Latchbolt Monitor switch available

Models Available:

LPM110EU
Passage:

• Latchbolt Control: Latchbolt retracted by lever outside or by lever inside. Applied powerelectronically (EU) retracts latchbolt for push/pull operation.
• Lever Control:Outside Lever & Inside LeverAlways free ingress & egress

LPM180EU
Storeroom:

• Latchbolt Control: Latchbolt retracted by key outside or by lever inside. Applied powerelectronically (EU) retracts latchbolt for push/pull operation.
• Lever Control:Outside LeverAlways Rigid (Locked)Inside LeverAlways free egress

LPM182EU
Institutional:

• Latchbolt Control: Latchbolt retracted by key outside or inside (Double Cylinder operation).Applied power electronically (EU) retracts latchbolt for push/pull operation.
• Lever Control:Outside Lever & Inside LeverAlways Rigid (Locked)

LPM183EUxEL
LPM184EUxEU
Storeroom x Storeroom:

• Latchbolt Control: Latchbolt retracted by key outside or by inside lever. Applied powerelectronically (EU) retracts latchbolt for push/pull operation.
• Lever Control:Outside LeverEL - locked electronically: Applied power prohibits Outside lever fromretracting latchbolt.EU - unlocked electronically: Applied power allows Outside lever toretract latchbolt.Inside LeverAlways free egress.

LPM185EUxEL
LPM186EUxEU
Institutional x Storeroom:

• Latchbolt Control: Latchbolt retracted by key outside or inside (Double Cylinder operation).Applied power electronically (EU only) retracts latchbolt for push/pulloperation.
• Lever Control:Outside LeverAlways Clutching (Does not activate outside lever at anytime)Inside LeverEL - locked electronically: Applied power prohibits Inside lever fromretracting latchbolt.EU - unlocked electronically: Applied power allows Inside lever to retractlatchbolt.

LPM187EUxEL
LPM188EUxEU
Institutional x Institutional:

• Latchbolt Control: Latchbolt retracted by key outside or inside (Double Cylinder operation).Applied power electronically (EU only) retracts latchbolt for push/pulloperation
• Lever Control:Outside Lever & Inside LeverEL - locked electronically: Applied power prohibits both levers fromretracting latchbolt.EU - unlocked electronically: Applied power allows both levers to retractlatchbolt

Controlled Access Application Example #1
The DC USA Approved LPM180 mortise lock may be utilized in conjunction with any access control application using standard mortise locksets. When activated the LPM180 creates a push/pull that satisfies both in-swinging and out-swinging doors. Inside free egress can be attained by turning the inside lever to manually open the door. Outside access is controlled by the access control system or by physical key override.



Controlled Access Application Example #2