ADA 10" Center To Center Mounted Extra Heavy Duty Offset Pull Handle Manufactured From Extruded Aluminum For Storefront Glass Doors
The Tahoma extra heavy duty storefront door pull handle is designed to mount to any storefront door. This Tahoma pull handle is commercial grade and manufactured from heavy duty extruded aluminum, ensuring that bending or denting will not occur even on the most abusive storefront entrance doors. Tahoma storefront door pull handles are class 1 anodizing providing an overall finish protection as well as UV protection.
ADA Compliance
ADA, or the American Disabilities Act, was a law passed in 1990 to ensure equal accessibility for all. The guidelines must be followed by all commercial buildings. Unfortunately, in today's market there are many imported pull handles and push bars being offered for very inexpensive prices, that do not meet the ADA guidelines. This is most likely because they are manufactured in countries which do not follow or have these guidelines set into place. If you are a building owner or contractor, when you purchase a Tahoma storefront door handle, you can have the peace of mind knowing that our products are ADA compliant and Building Code Compliant.
Installation
The Tahoma extra heavy duty storefront door offset pull handle can be retrofitted to replace any existing storefront door offset pull handle. The Tahoma extra heavy duty offset pull handle mounts to the door at the top and bottom of the pull handle. The Tahoma extra heavy duty offset pull handle is 10" center to center of the door mounting points. If your storefront door has a different center to center measurement, then the Tahoma extra heavy duty offset pull handle can still be installed by simply drilling new center to center mounting holes in the door stile. The old, existing mounting holes from the non-standard pull handle can be filled with bondo and then re-sprayed with touch up paint.
Tahoma Extra Heavy Duty Offset Pull Handle Features
- Heavy Duty
- Designed To Hold Up On Abusive Doors
- Constructed From Extruded Aluminum
- 10" Center To Center Handles
- Non-Handed Design
- For Use On Commercial Aluminum Storefront Doors
- Surface Mount Hardware Included
- Class 1 Anodized Finish
Tahoma Center To Center Measurement
The center to center measurement is the distance between the centerline of the top portion of the pull handle and the bottom portion. Refer to the product image for an illustration.
Tahoma Mounting
The Tahoma extra heavy duty storefront door offset pull handle is mounted using two concealed studs that are tapped with a 1/4-20 thread and designed to fit into the aluminum door frame stile. The extruded heavy duty handle covers the two studs and secures to them with allen head screws providing and elegant concealed look.
