DC USA Approved ML485EU Fail Secure Electrified Solenoid Privacy With Deadbolt Mortise Lock Chassis Only (Schlage L9000 Series Replica)
The DC USA Approved electrified Schlage L9000 series mortise lock line allows for remotekeyless access and egress control for heavy use applications where security and safety iscritical. These locks may be purchased as complete locks, chassis only or as modificationsonly (add MD prefix for modification only of customers' L9050 lock bodies). Along withthe styles and finishes listed, we offer multiple functions and voltages to meet yourrequirements. Common applications include stairwell doors, lobby entrances, computerrooms, classrooms, interior and exterior doors.
Features:- Continuous duty solenoids allow for "continuouslyon" applications such as Fail Safe or an unlock cycle
- Plug-in bridge rectifier that allows for an AC or DCpower source
- Low current draw
Options:- REXBYPASS - Request to Exit Bypass switch available (onall functions): request to exit (REX) switch will be bypassedwhen the lock is in the unlocked state, preventing false REXsignals.
- EZ-REX-SCH - Field installable Request to Exit or AE Switch
- REX - Request to Exit or AE switch available (on all functions)
- LBM - Latchbolt Monitor switch available (storeroom only)
- DPS - Door Position switch available (storeroom only)
- DBM - Deadbolt Monitor switch available (on ML53 only)
- SLM - Solenoid Monitor switch available (storeroom only)
- SCM - Security Monitor switch available (storeroom only)
- CRU2 - Current Reduction Unit to improve solenoid life incontinuously on applications
- CRU2i - The intelligent CRU2: automatically detects DC inputvoltage between 12 to 30 volts and converts it to operateour 12V locks. Additionally, it adjusts the current to thesolenoid allowing the lockset to run cooler and last longerwithout any manual adjustments.
Specifications:- Operating Voltage - 12 or 24VAC/DC (+or- 10%)(must specify 12 or 24 volts when ordering)
- Amperage - 12V = 700 mA / 24V = 350 mA
- Solenoid coil resistance - 12V = 18 Ohms / 24V = 69 Ohms
- Power consumption - 8 watts
- Available Fail Safe (Electrically Locked) or Fail Secure(Electrically Unlocked)
Recommended Locking Hardware Power Supplies:- PS204/PS204B
- PS220/220B
- PS480B
- PS2
- PS5-8
Models Available:- ML80 - storeroom:(fail safe/fail secure):Outside lever locked (EL) or unlocked (EU) electronically. Latchbolt retractedby key outside or lever inside. Switched power allows outside lever to retractlatchbolt. Inside lever is always free for immediate egress.
- ML82 - institutional:(fail safe/fail secure):Outside and inside levers simultaneously locked (EL) or unlocked (EU)electronically. Latchbolt retracted by key on either side. Switched powerallows both levers to retract latchbolt.
- ML70 - classroom:(fail safe/fail secure):Outside lever locked (EL) or unlocked (EU) electronically. Latchboltretracted by lever on either side unless outside has been locked by key.Switched power allows outside lever to retract latchbolt. Inside lever isalways free for immediate egress.
- ML480 - entry w/ deadbolt:(fail safe/fail secure):Outside lever locked (EL) or unlocked (EU) electronically. Latchbolt anddeadbolt retracted by key outside or lever inside. Switched power allowsoutside lever to retract latchbolt and deadbolt. Inside lever is always freefor immediate egress.
- ML485 - privacy w/ deadbolt:(fail secure):Outside lever unlocked (EU) electronically. Latchbolt and deadbolt retractedby key outside or lever inside. Switched power allows outside lever to retractlatchbolt unless deadbolt is thrown. Inside lever is always free for immediateegress. Available in EU (electronically locked) function only.