DC USA Approved PD18-M-RIM Electrified Rim Exit Device With Motor Retraction (Adams Rite 8800 Series Replica)
The DC USA Approved PD18 series is available a solenoid latch pullback Grade1 architectural exit device; made for use in all institutions and commercialbuildings storefront applications. Install this device with the confidence of knowingthat the PD18 series meets or exceeds the high standards of other grade 1 products. Inretrofit situations for the Adams Rite 88 or 8600 series you can utalize the exsisitinghardware (i.e vertical rods) with no additional prep required. The PD18-RIM is alsoavailable in 12V version.
Features:
Our motorized latch retraction is fast, quiet, and smooth!
MM4 Smart Module: On board diagnostics with audible feedback for adjustment and power issues
"PTS": 5 second electronic adjustment for easy post installation adjustment
Electric dogging rated for continuous duty - Auto re-engage if pulled from the dogged position
Low current draw: Compatible with most 24VDC, 1A (or greater) regulated & linear power supplies
Up to 300' with 2-18ga --Long wire runs with provides installer with convenience of placing the lockingdevice power supply in a centralized location; i.e. the same closet as the access panel
8' cable with Quick Connect for MM4 module to easily connect to power supply lead
The slim, compact attractive low profile design enables mounting on narrow-style doors.
Retrofits Adams Rite 8800/8600 series
Maintains factory dogging
Specifications:
Voltage range - 24 to 28 VDC
System protec on - unit shutdown when voltageexceeds 28VDC
Standard - Average Current Peak: 900MA,Average Current Hold: 190mA
High Torque - Average Current Peak: 1.4A, Average Current Hold: 250mA