DC USA Approved PD18-M-RIM Electrified Rim Exit Device With Motor Retraction (Adams Rite 8800 Series Replica)

The DC USA Approved PD18 series is available a solenoid latch pullback Grade1 architectural exit device; made for use in all institutions and commercialbuildings storefront applications. Install this device with the confidence of knowingthat the PD18 series meets or exceeds the high standards of other grade 1 products. Inretrofit situations for the Adams Rite 88 or 8600 series you can utalize the exsisitinghardware (i.e vertical rods) with no additional prep required. The PD18-RIM is alsoavailable in 12V version.

Features:

• Our motorized latch retraction is fast, quiet, and smooth!
• MM4 Smart Module: On board diagnostics with audible feedback for adjustment and power issues
• "PTS": 5 second electronic adjustment for easy post installation adjustment
• Electric dogging rated for continuous duty - Auto re-engage if pulled from the dogged position
• Low current draw: Compatible with most 24VDC, 1A (or greater) regulated & linear power supplies
• Up to 300' with 2-18ga --Long wire runs with provides installer with convenience of placing the lockingdevice power supply in a centralized location; i.e. the same closet as the access panel
• 8' cable with Quick Connect for MM4 module to easily connect to power supply lead
• The slim, compact attractive low profile design enables mounting on narrow-style doors.
• Retrofits Adams Rite 8800/8600 series
• Maintains factory dogging

Specifications:

• Voltage range - 24 to 28 VDC
• System protec on - unit shutdown when voltageexceeds 28VDC
• Standard - Average Current Peak: 900MA,Average Current Hold: 190mA
• High Torque - Average Current Peak: 1.4A, Average Current Hold: 250mA
• PTS adjustment - approx. 1/4"Electronic traveladjustment - approx. 1/4"
• 300' with 18ga wire
• 500' with 16ga wire

Hardware:
Handing:

• Device is non-handed.

Pushbar Length:

• Standard sizes: dimensioned for 36" and 48" openings.Standard width bars can be field cut to the nextsmallest opening width.
• 48" - Cutdown 8"
• 36" - Cutdown 8"

Door Thickness:

• Suits 1-3/4" standard

Projection:

• 2-5/8" when fully projected, 1-5/8"when dogged.

Stile Width:

• Minimum 2" Stile. Fits narrow, medium, and wide stilealuminum doors.

Dogging:

• Standard dogging with hex key or cylinder dogging option.Electric dogging also available

Fasteners:

• Standard self-tapping screws

Verticle Rods:

• Top and bottom steel rods for easy adjustment
• Standard device is adjustable for nominal door heights.