• Need Help? 866-232-5673 M-F 9AM-3PM CST

FREE SHIPPING ORDERS OVER $200
Only within the Continental U.S.

-
Home > Support > Tools > Door Closer Hole Pattern Tool - Match Existing Mounting Holes

Door Closer Hole Pattern Tool - Match Existing Mounting Holes

Door Closer Hole Pattern Tool - Match Existing Mounting Holes

Replacing a surface-mounted commercial door closer? Use this tool to match your existing mounting hole spacing to common industry footprints so you can select a compatible replacement.

Important:ALL measurements on this page are CENTER-TO-CENTER measurements. Measure from the center of one mounting hole to the center of the next (horizontal and vertical).

Shop Door ClosersSupportContact Us

How to Measure Your Existing Door Closer Hole Pattern

  1. Open the door and locate the closer body mounting screws.
  2. Measure center-to-center:
    • Horizontal = left-to-right hole spacing
    • Vertical = up-to-down hole spacing
  3. Match your measurements to the closest pattern below and confirm using the manufacturer’s installation template.

These center-to-center patterns are commonly found on commercial door closers from brands such as LCN, Norton, Yale, Dorma, and similar manufacturers.

Jump to a Hole Pattern (All Center-to-Center)

3/4" Vertical x 12" Horizontal

Center-to-Center: 12" x 3/4"

Door closer hole pattern diagram showing 12 inch horizontal and 3/4 inch vertical center to center mounting holes

Center-to-center hole spacing (12" horizontal x 3/4" vertical).

  • Entry Systems - 12" x 3/4" (center to center) - Product link
  • LCN - 12" x 3/4" (center to center)
  • Falcon - 12" x 3/4" (center to center)
  • Norton - 12" x 3/4" (center to center)
  • Yale - 12" x 3/4" (center to center)
  • Door Controls - 12" x 3/4" (center to center)
  • Dorma - 12" x 3/4" (center to center) - Product link
  • Design Hardware - 12" x 3/4" (center to center)
  • Hager - 12" x 3/4" (center to center)
  • Stanley - 12" x 3/4" (center to center)
  • Cal-Royal - 12" x 3/4" (center to center) - Product link
  • Best - 12" x 3/4" (center to center)
  • Arrow - 12" x 3/4" (center to center)
  • Sargent - 12" x 3/4" (center to center)
  • Doormerica - 12" x 3/4" (center to center)
  • Dexter - 12" x 3/4" (center to center)
  • Townsteel - 12" x 3/4" (center to center)
  • International - 12" x 3/4" (center to center) - Product link
  • PDQ - 12" x 3/4" (center to center)
  • Tell - 12" x 3/4" (center to center)
  • Calibre - 12" x 3/4" (center to center)
  • Global - 12" x 3/4" (center to center) - Product link
  • Entry Systems - 12" x 3/4" (center to center) - Product link
  • Liberty - 12" x 3/4" (center to center) - Product link

3/4" Vertical x 9-1/16" Horizontal

Center-to-Center: 9-1/16" x 3/4"

Door closer hole pattern diagram showing 9-1/16 inch horizontal and 3/4 inch vertical center to center mounting holes

Center-to-center hole spacing (9-1/16" horizontal x 3/4" vertical).

  • Entry Systems - 9-1/16" x 3/4" (center to center) - Product link
  • Liberty - 9-1/16" x 3/4" (center to center) - Product link
  • Arrow - 9-1/16" x 3/4" (center to center) - Product link
  • Calibre - 9-1/16" x 3/4" (center to center) - Product link
  • Cal-Royal - 9-1/16" x 3/4" (center to center) - Product link
  • CRL - 9-1/16" x 3/4" (center to center) - Product link
  • Design Hardware - 9-1/16" x 3/4" (center to center) - Product link
  • Deltana - 9-1/16" x 3/4" (center to center)
  • Dexter - 9-1/16" x 3/4" (center to center) - Product link
  • Door Controls - 9-1/16" x 3/4" (center to center) - Product link
  • Doromatic - 9-1/16" x 3/4" (center to center) - Product link
  • Dorma - 9-1/16" x 3/4" (center to center) - Product link
  • Falcon - 9-1/16" x 3/4" (center to center) - Product link
  • Global - 9-1/16" x 3/4" (center to center) - Product link
  • Hager - 9-1/16" x 3/4" (center to center) - Product link
  • International - 9-1/16" x 3/4" (center to center) - Product link
  • LCN - 9-1/16" x 3/4" (center to center) - Product link
  • Norton - 9-1/16" x 3/4" (center to center) - Product link
  • PDQ - 9-1/16" x 3/4" (center to center) - Product link
  • Phoenix - 9-1/16" x 3/4" (center to center) - Product link
  • Sargent - 9-1/16" x 3/4" (center to center)
  • Stanley - 9-1/16" x 3/4" (center to center) - Product link
  • Tell - 9-1/16" x 3/4" (center to center) -
  • Yale - 9-1/16" x 3/4" (center to center) - Product link
  • Townsteel - 9-1/16" x 3/4" (center to center)

2-1/4" Vertical x 5" Horizontal

Center-to-Center: 5" x 2-1/4"

Door closer hole pattern diagram showing 5 inch horizontal and 2-1/4 inch vertical center to center mounting holes

Center-to-center hole spacing (5" horizontal x 2-1/4" vertical).

  • Entry Systems - 5" x 2-1/4" (center to center) - Product link
  • Liberty - 5" x 2-1/4" (center to center) - Product link
  • LCN - 5" x 2-1/4" (center to center) - Product link
  • Best - 5" x 2-1/4" (center to center)
  • Yale - 5" x 2-1/4" (center to center)
  • Hager - 5" x 2-1/4" (center to center)
  • Stanley - 5" x 2-1/4" (center to center)
  • Cal-Royal - 5" x 2-1/4" (center to center)
  • Design Hardware - 5" x 2-1/4" (center to center)
  • Doormerica - 5" x 2-1/4" (center to center)
  • Norton - 5" x 2-1/4" (center to center)
  • Arrow - 5" x 2-1/4" (center to center)
  • Dexter - 5" x 2-1/4" (center to center)
  • Townsteel - 5" x 2-1/4" (center to center)
  • PDQ - 5" x 2-1/4" (center to center)
  • Deltana - 5" x 2-1/4" (center to center)
  • Tell - 5" x 2-1/4" (center to center)
  • International - 5" x 2-1/4" (center to center) - Product link
  • Calibre - 5" x 2-1/4" (center to center) - Product link
  • CRL - 5" x 2-1/4" (center to center)
  • Global - 5" x 2-1/4" (center to center) - Product link

2-3/8" Vertical x 6-3/4" Horizontal

Center-to-Center: 6-3/4" x 2-3/8"

Door closer hole pattern diagram showing 6-3/4 inch horizontal and 2-3/8 inch vertical center to center mounting holes

Center-to-center hole spacing (6-3/4" horizontal x 2-3/8" vertical).

  • LCN - 6-3/4" x 2-3/8" (center to center) - Product link
  • Falcon - 6-3/4" x 2-3/8" (center to center) - Product link
  • Norton - 6-3/4" x 2-3/8" (center to center)
  • Yale - 6-3/4" x 2-3/8" (center to center)
  • Dexter - 6-3/4" x 2-3/8" (center to center)

1" Vertical x 7-1/2" Horizontal

Center-to-Center: 7-1/2" x 1"

Door closer hole pattern diagram showing 7-1/2 inch horizontal and 1 inch vertical center to center mounting holes

Center-to-center hole spacing (7-1/2" horizontal x 1" vertical).

2-1/2" Vertical x 6" Horizontal

Center-to-Center: 6" x 2-1/2"

Door closer hole pattern diagram showing 6 inch horizontal and 2-1/2 inch vertical center to center mounting holes

Center-to-center hole spacing (6" horizontal x 2-1/2" vertical).

2-1/8" Vertical x 5" Horizontal

Center-to-Center: 5" x 2-1/8"

Door closer hole pattern diagram showing 5 inch horizontal and 2-1/8 inch vertical center to center mounting holes

Center-to-center hole spacing (5" horizontal x 2-1/8" vertical).

  • Dorma - 5" x 2-1/8" (center to center)

3/4" Vertical x 10-1/4" Horizontal

Center-to-Center: 10-1/4" x 3/4"

Door closer hole pattern diagram showing 10-1/4 inch horizontal and 3/4 inch vertical center to center mounting holes

Center-to-center hole spacing (10-1/4" horizontal x 3/4" vertical).

  • Best - 10-1/4" x 3/4" (center to center)
  • Dorma - 10-1/4" x 3/4" (center to center) - Product link

9/16" Vertical x 11-1/8" Horizontal

Center-to-Center: 11-1/8" x 9/16"

Door closer hole pattern diagram showing 11-1/8 inch horizontal and 9/16 inch vertical center to center mounting holes

Center-to-center hole spacing (11-1/8" horizontal x 9/16" vertical).

  • Cal-Royal - 11-1/8" x 9/16" (center to center)
  • Doormerica - 11-1/8" x 9/16" (center to center)
  • Townsteel - 11-1/8" x 9/16" (center to center)

3/4" Vertical x 11-1/8" Horizontal

Center-to-Center: 11-1/8" x 3/4"

Door closer hole pattern diagram showing 11-1/8 inch horizontal and 3/4 inch vertical center to center mounting holes

Center-to-center hole spacing (11-1/8" horizontal x 9/16" vertical).

  • Liberty - 11-1/8" x 3/4" (center to center) - Product link
  • Global - 11-1/8" x 3/4" (center to center) - Product link
  • Door Controls USA - 11-1/8" x 3/4" (center to center) - Product link
  • International - 11-1/8" x 3/4" (center to center) - Product link

1" Vertical x 4-5/16" Horizontal

Center-to-Center: 4-5/16" x 1"

Door closer hole pattern diagram showing 4-5/16 inch horizontal and 1 inch vertical center to center mounting holes

Center-to-center hole spacing (4-5/16" horizontal x 1" vertical).

  • Corbin Russwin - 4-5/16" x 1" (center to center)

1" Vertical x 11-1/8" Horizontal

Center-to-Center: 11-1/8" x 1"

Door closer hole pattern diagram showing 11-1/8 inch horizontal and 1 inch vertical center to center mounting holes

Center-to-center hole spacing (11-1/8" horizontal x 1" vertical).

  • Sargent - 11-1/8" x 1" (center to center)

1" Vertical x 10-3/8" Horizontal

Center-to-Center: 10-3/8" x 1"

Door closer hole pattern diagram showing 10-3/8 inch horizontal and 1 inch vertical center to center mounting holes

Center-to-center hole spacing (10-3/8" horizontal x 1" vertical).

  • Sargent - 10-3/8" x 1" (center to center)

1" Vertical x 10" Horizontal

Center-to-Center: 10" x 1"

Door closer hole pattern diagram showing 10 inch horizontal and 1 inch vertical center to center mounting holes

Center-to-center hole spacing (10" horizontal x 1" vertical).

  • Corbin Russwin - 10" x 1" (center to center)
  • Norton - 10" x 1" (center to center)

2-1/2" Vertical x 9" Horizontal

Center-to-Center: 9" x 2-1/2"

Door closer hole pattern diagram showing 9 inch horizontal and 2-1/2 inch vertical center to center mounting holes

Center-to-center hole spacing (9" horizontal x 2-1/2" vertical).

  • Best - 9" x 2-1/2" (center to center)
  • Sargent - 9" x 2-1/2" (center to center)

1-3/8" Vertical x 4-1/8" Horizontal

Center-to-Center: 4-1/8" x 1-3/8"

Door closer hole pattern diagram showing 4-1/8 inch horizontal and 1-3/8 inch vertical center to center mounting holes

Center-to-center hole spacing (4-1/8" horizontal x 1-3/8" vertical).

  • Norton - 4-1/8" x 1-3/8" (center to center)
  • Yale - 4-1/8" x 1-3/8" (center to center)

1-23/32" Vertical x 6-17/64" Horizontal

Center-to-Center: 6-17/64" x 1-23/32"

Door closer hole pattern diagram showing 6-17/64 inch horizontal and 1-23/32 inch vertical center to center mounting holes

Center-to-center hole spacing (6-17/64" horizontal x 1-23/32" vertical).

Reminder: This is a retrofit reference tool. Always confirm final compatibility using the manufacturer’s installation template and verify the mounting application (regular arm, top jamb, or parallel arm). Need help choosing a replacement? Call 866-232-5673 or text 210-275-8966.

Need Help?

Give Us A Call At 866-232-5673 or Text Us With Photos At 210-275-8966

Whether you need a quotation or just have a question about a product. Reach out to us today by calling 866-232-5673 or text us questions and photos at 210-275-8966, and one of friendly specialists will be happy to help!

Call 866-232-5673
Empty Cart