Trulite 200, 300, 500 Series Door Installation

1. Lift door upward and tilt in open position. Place door portion of bottom pivot on frame portion of bottom pivot.
2. Depress the pivot pin in the door portion of the top pivot.
3. Slide door portion of top pivot under the frame top pivot.
4. Jiggle door until the pivot pin slides into the frame top pivot. Note: to remove door, take the screws out of the frame portion of top pivot and let drop. Then tip door out of frame.
5. Now that the door is hung, it is tie for final adjustments and attachment of hardware. Note: If you don't have a pre-glazed door, glaze the door before attachment of hardware and hanging door.