ProGrade Architectural U-404 Door Shoe Installation Instructions

Installation Instructions
Tools Required

• Power tool drill
• Marker
• Measuring Tape
• Screw Driver
• Hand Saw

1. Remove the door if necessary to prepare the bottom of the doorprior to installation of door shoe.
2. Measure, mark, and trim door shoe exact to the full width of the door.Trim seal 1/16” longer than trimmed door shoe on each end. Crimpends to secure insert.
3. Drill pilot holes in header stop for the screw at marks.
4. Slide door shoe in place and insert screws.Adjust to ensure light even contact with threshold.Fasten the screws.