DC USA Approved MRC1 Mortise Lock Chassis (Best 35/45, Cal Royal 8000, Corbin Russwin 2000, Falcon MA Replica)
The DC USA Approved MRC1 retrofit chassis series utilizes a high quality Grade 1 chassis
built to withstand years of use. You can install this lock with the confidence of knowing
that the MRC1 carries our top tier features, options, and specifications. The MRC1 allows
for field handing. This mortise lock retrofits
any of the original manufactures series compatible trim and includes a new faceplate &
strikeplate.
Voltage:
- Operating Voltage - 12 or 24VAC/DC (+or- 10%)
- Amperage - 12V = 700 mA / 24V = 350 mA
- Solenoid coil resistance - 12V = 18 Ω / 24V = 69 Ω
- Power consumption - 8 watts
- Available Fail Safe (EL) or Fail Secure (EU)
Accessories:
- Current Reduction Unit (CRU2) - 10-30V input
manages power to efficiently control a 12 or 24V
solenoid. Improve solenoid life in “continuously on”
applications.
- Request to Exit (REX) - sends a signal to alert the
control panel that the door is about to be opened
by someone intending to exit from within a secured
area.
- Latchbolt Monitor (LBM) - Monitor the position of the
latchbolt
Features:
- Continuous duty solenoids allow for “continuously
on” applications such as Fail Safe or an unlock cycle
- Plug-in bridge rectifier that allows for an AC or DC
power source supplied with all locks
- Low current draw
- Handing Field Reversible
Recommended Locking Hardware Power Supplies:
- PS204/PS204B
- PS220/220B
- PS480B
- PS2
- PS5-8
Models Available:
- MRC135D, MRC18080, MRC105/03, MRC181/51 - Storeroom:
(fail safe/fail secure)
Outside lever locked (EL) or unlocked (EU) electronically. Latchbolt
retracted by key outside or lever inside. Applied power allows outside
lever to retract latchbolt. Inside lever is always free for immediate egress.
- MRC135W, MRC180802, MRC104/01, MRC121/11 - Institutional:
(fail safe/fail secure)
Outside and inside levers simultaneously locked (EL) or unlocked
(EU) electronically. Latchbolt retracted by key on either side. Applied
power allows both levers to retract latchbolt.
- MRC1681/51 - Entry w/ deadbolt:
(fail safe/fail secure)
Outside lever locked (EL) or unlocked (EU) electronically. Latchbolt and
deadbolt retracted by key outside or lever inside. Applied power allows
outside lever to retract latchbolt and deadbolt. Inside lever is always
free for immediate egress
Installation Example:
|
|