Kawneer Husky II Specifications
FEATURES
- Independently tested and certified to Meet ANSI A156.4, Grade 1, exceeding the required 2,000,000 independent lab test cycles.
- Center Hung Door Application : Double or Single Acting (applied door stop renders unit Single Acting). Adjustable ‘S’ type side loading or ‘A’ type, K’ type, and ‘PT’ type end loading arms are available for center pivoted door applications.
- Offset Hung Door Application : Single Acting Offset ‘JO’ and ‘VO’ type top arms are available for butt hung or offset pivoted applications.
DOOR CLOSER FUNCTIONS
- Built-in positive Back Stop and Hold-Open positions are available : 105° Back Stopwith Hold-Open, 105° Back Stop -no Hold-Open, 90° Back Stop with Hold-Open
- Handicap (ADA) spring tensions available for use on center pivoted door applications : 8-1/2 lb. Opening Force (Exterior Door)
ADA Opening Force Requirements
Caution: Any manual door closer, installed and adjusted based on
ADA or other reduced opening force requirements may not provide sufficient power to reliably close and latch the door.
- Standard Fixed spring tensions available : Light, Medium, Heavy
- Dual Speed Control Valves : Closing and Latching speeds controlled by separate regulating valves, fully adjustable after installation.
- Adjustable dual purpose radial ball-bearing bottom pivot set is provided for floor or threshold mounted (Side or End Loading) center pivoted installation.
- Universal application. Non-handed for left or right door application.
- Installs in an aluminum storefront header or transom as small as 1-3/4" x 4".
- Positive cam centering for alignment and to hold door closed against normal wind or draft conditions.
- Stable hydraulic door check fluid for any climatic operation and provides constant lubrication
Center Hung Doors
Complete units for aluminum doors and frames are furnished with top arm assembly (‘S’ side loading, ‘A’, ‘K’, or ‘PT’ end loading), adjustable dual purpose bottom pivot set for floor or threshold mounting (side or end loading), and anchor set with all fasteners.‘S’ type side loading top arm, CA3010-DP adjustable dual
purpose pivot set, and the CA3010-FS anchor set will be furnished unless otherwise specified by the customer. A’ type, ‘K’ type or ‘PT’ type end loading, and ‘JO’ or ‘VO’ type offset arms are optional, but must be specified.
Offset Hung Doors
Complete units for offset pivoted or butt hung aluminum doors and frames are furnished with a ‘JO’ or ‘VO’ type offset arm and anchor set with all fasteners. (Offset pivots or butt hinges not included. Note: Top Door Stop / Arm Cover by others).
![]()
