Trulite DF450, DF451 Storefront Frame Installation Instructions

Frame Assembly Instructions

1.Verify opening size. Allow for 1/4" (6.4) shim and caulk space at sides and top of frame head.
2.Identify hinge jamb and strike jamb. Line top of hinge jamb and strike jamb up with header extrusion. Using provided hardware insert fasteners from open throat side of frame and secure into frame head.
3. Attach bottom pivot(s) to jamb(s), then attach threshold to assembly.
4. Install top pivot to door header

Frame Installation Instructions

1. Set frame into opening plumb and square.
2. Drill holes for #12 installation screws starting 6" (152.4)from corners and not more than 24" (609.6) O.C.
3. Secure jambs and head to opening and threshold to floor with #12 screws. See DETAIL B

4. If pivot is not supported by finished floor, block as required. See DETAIL C.

5. Snap door stops with weatherstrip into jambs and door header. Jamb stops run through.