
Do Not Risk Non-Certified Door Thresholds. GapFix thresholds are UL certified and approved for rated openings. When compliance matters, use hardware that is tested and documented.
The GapFix Water Control Door Seal Kit helps reduce water intrusion at commercial door openings exposed to heavy rain and weather. This kit is designed for entrances that are sloped properly and need an improved seal to help deter water from coming under the door.
This kit is not waterproof. If your entrance was built with an improper slope or water pools directly in front of the opening, water infiltration may still occur. This kit is designed to improve sealing performance on entrances where drainage conditions are already correct.
This kit is designed for commercial openings using a 2 each 36" wide doors that have approximately a 3/4" gap between the bottom of the door and finished floor.
The included 1" tall bumper seal threshold helps close this gap and allows for approximately a 1/4" compression seal across the bottom of the door when used with the included bottom door sweep. This helps improve sealing performance and assists in reducing water intrusion at properly sloped entrances.
When used together on a properly sloped entrance, this kit helps reduce water penetration and assists in keeping your entryway drier during rain conditions.
The included 1" tall bumper seal threshold does not meet ADA compliance requirements, which typically limit threshold height to 1/2" maximum.
Because of the increased height of the bumper seal, always consult your local Authority Having Jurisdiction (AHJ) to confirm whether ADA compliant hardware is required for your specific entrance.
If ADA compliance is required, see our GapFix ADA Water Control Kit, which includes a 1/2" tall bumper threshold. Please note that the ADA version will only work when the gap beneath the door and finished floor is approximately 1/4" to 3/8".

Our specialists are just a phone call away. Call 866-232-5673 and we will gladly assist you!

