• Need Help? 866-232-5673 M-F 9AM-3PM CST

Navigate to the undefined homepage

FREE SHIPPING ON ALL ORDERS
Only within the Continental U.S.

Home > Help Center > Door Closer Information > How Do You Adjust Opening Pressure On A Door Closer?

How Do You Adjust Opening Pressure On A Door Closer?

How Do You Adjust Opening Pressure On A Door Closer?


There are two different types of door closers. Fixed spring and adjustable spring. Both closers operate similarly in which there is an internal spring that stores energy as it compresses when the door opens, and releases energy as the spring decompresses to close the door. What sets these closers apart is the ability to adjust the tension on the spring; or the ability to adjust opening pressure, or opening force that is required to open the door.

For fixed spring closers there is no adjustment for opening pressure. You will need to purchase an adjustable spring closer to do so. Adjustable spring closers can be found here.

Adjustable door closers are the only closers that have the ability to compress or decompress the spring tensions by adjustment, resulting in lesser or greater force required to open and close the door.


ADA Guidelines


First you need to identify your door to make sure you are complying with ADA guidelines. When it comes to adjusting the door opening pressure, no more than 5lbs of opening force is required for interior doors. If it's an exterior door it may not exceed more than 8.5lbs typically.


Other Factors


Many Door closers can be adjusted to ADA compliance. However, your door can have other factors hindering its operation, such as HVAC stack pressure, door weather stripping, bad door hinges, etc. All these issues can be factors that affect the opening force lbs. To check to see if your door is being affected by these factors you need to remove door sweeps, lube hinges, etc so that the door is not binding or experiencing any force that will make your reading difficult.


How To Properly Measure Opening Pressure


The force is measured when the door is unlatched and consistent pressure is used to push it open. NOTE: The initial force to open the door is not counted.


Adjustability

Always reference the door closers manufacturer guidelines before making any adjustments to the closer. Manufacturer guidelines will have an adjustment chart which shows the recommend number of turns they require for doors of varying dimensions.




I Have Tried All The Above


There are some doors where no matter what you do, the opening force requirement cannot be met. For these cases your only option is using a low energy automatic ADA door opener in order to reach ADA compliance.




DISCLAIMER:INFORMATION PROVIDED THROUGH THIS SITE IS PROVIDED TO YOU AS IS WITHOUT ANY EXPRESS REPRESENTATIONS OR WARRANTIES OF ANY KIND, AND WE MAKE NO REPRESENTATION OR WARRANTY THAT THIS SITE (OR ANY INFORMATION PROVIDED IN RESPONSE TO YOUR INQUIRY), WILL BE ACCURATE, COMPLETE, OR ERROR-FREE.YOU AGREE THAT YOU MUST EVALUATE ALL INFORMATION AND RESPONSES, AND THAT YOU BEAR ALL RISKS ASSOCIATED WITH, THE USE OF THIS SITE, INCLUDING ANY RELIANCE ON THE ACCURACY,COMPLETENESS, OR USEFULNESS OF ANY INFORMATION OR MATERIALS MADE AVAILABLE THROUGH THIS SITE.

Need Help?

Give Us A Call At 866-232-5673

Whether you need a quotation or just have a question about a product. Reach out to us today at 866-232-5673, and one of friendly specialists will be happy to help!

Empty Cart