The Phoenix Door Controls 416 is a heavy-duty, ANSI/BHMA Grade 1 surface mount door closer built for high-traffic commercial openings. It features adjustable spring power Size 1–6, independentclosing and latch speed valves, adjustable opening check (backcheck), and an adjustable friction hold-open arm so you can set the door to stay open during busy hours and release it when traffic slows. Clean aluminum finish complements modern storefront and interior designs.
How the Adjustable Friction Hold-Open Works
Set a desired hold-open angle (commonly between 85°–110°, project dependent) using the arm’s friction adjustment.
During peak times, open the door to the set angle and it will stay open until pulled closed.
Turn the friction tension down (or past the hold-open point) to use the closer in standard self-closing mode.
Flexible Mounting Options
Regular (pull-side) mounting on the door
Top jamb (push-side) mounting on the frame
Parallel arm (push-side) mounting for low-profile installations
Fire-Door Note: Friction hold-open arms are generally not permitted on labeled fire-rated doors unless used with an approved release device tied to the life-safety system. Confirm local code and AHJ requirements before specifying.
Key Features
Grade 1 performance for demanding, high-traffic use
Adjustable spring power Size 1–6 to match door size, weight, and conditions
Adjustable closing speed and latch speed valves for precise control
Adjustable opening check (backcheck) to cushion against abrupt stops and wind gusts
Adjustable friction hold-open arm for set-and-stay convenience during busy periods
Supports regular, top jamb, and parallel arm mounting
Regular (pull-side), Top jamb (push-side), Parallel arm (push-side)
Finish
Aluminum
Applications
Retail, office, education, healthcare, and other commercial facilities
What’s Included
416 closer body
Adjustable friction hold-open arm assembly
Mounting hardware (per standard installations)
Installation instructions
Notes
Set spring power (Size 1–6) and fine-tune closing, latch, backcheck, and hold-open during commissioning.
Verify door size/weight, frame conditions, and substrate; use appropriate fasteners/anchors.
Confirm local code requirements for hold-open use, especially on fire-rated or egress doors.
Your Preferred Authorized Phoenix Door Controls Dealer — Backed by Expertise.Authentic hardware, specification guidance, and fast professional support.
For more shipping information please see click here.
Get A Commercial Door Quote Within 24 Hours
Try Our DOOR WIZARD and Build Your Commercial Door Now!
Need a commercial door quote? Try our easy to use interactive Door Wizard and receive a commercial door quote within 24 hours from one of our commercial door estimators.
