36" x 84" LHR Exterior Hollow Metal Door - KD Punch & Dimple Frame for Existing Brick Wall

Steel-Lite - Engineered for Compliance, Trusted by Inspectors.

36" x 84" LHR Exterior Hollow Metal Door - KD Punch & Dimple Frame for Existing Brick Wall - Image 1 of 0

36" x 84" LHR Exterior Hollow Metal Door - KD Punch & Dimple Frame for Existing Brick Wall - Video 2 of 1

36" x 84" Exterior Hollow Metal Door, LH Reverse, 18-Gauge Polystyrene Core, NFPA 80 Fire-Rated, ADA & IBC Compliant, UL Listed, KD Punch & Dimple Frame for Existing Brick Wall Opening, USA-Made (3-4 Week Production)

$

Choose your options:

Frame Jamb Depth:

4-3/4" Jamb Depth (3-3/4" Throat)

5-3/4" Jamb Depth (4-3/4" Throat)

6-1/4" Jamb Depth (5-1/4" Throat)

6-3/4" Jamb Depth (5-3/4" Throat)

7-1/4" Jamb Depth (6-1/4" Throat)

7-3/4" Jamb Depth (6-3/4" Throat)

8-1/4" Jamb Depth (7-1/4" Throat)

8-3/4" Jamb Depth (7-3/4" Throat)

9-1/4" Jamb Depth (8-1/4" Throat)

ADA Glass Window

ADA Glass Window:

No Thanks

6 in. Wide x 27 in. Narrow Window, 1/4" Tempered Clear Glass (No Fire Label)

6 in. Wide x 27 in. Tall Fire Rated Narrow Window, 1/4" Laminated Wire Glass

12 in. Wide x 12 in. Square Window, 1/4" Tempered Clear Glass (No Fire Label)

12 in. Wide x 12 in. Tall Fire Rated Square Window, 1/4" Laminated Wire Glass

24 in. Wide x 30 in. Tall Half Lite Window, 1/4" Tempered Clear Glass (No Fire Label)

24in. x 64 in. Full Lite Window, 1/4" Tempered Clear Glass (No Fire Label)

Frame Header:

2 in. Frame Header (Standard)

4 in. Frame Header

Product Code: SLTBR3070LHR

Inspection-Ready, Built to Spec, 3 to 4 Week Production

Orders Over $200 Qualify for FREE SHIPPING!

Qty:

Steel-Lite™ 36" x 84" Exterior Hollow Metal Door - LH Reverse

Application-focused package for existing brick wall openings: a Left Hand Reverse (LHR) hollow metal door paired with a KD punch & dimple retrofit frame and brick-compatible expansion/wedge anchors. USA-made with dependable 3–4 week production.

Compliance & Listing Options

NFPA 80 fire door assembly and UL/cUL labeling available when ordered and installed as a complete labeled assembly per listing.
ADA & IBC alignment for approach, clear width, operable parts, and closer force/speed when field-adjusted properly.
Factory preps available for ANSI/BHMA Grade 1 hardware sets.

Note: Standard configuration uses a polystyrene insulated core (non-rated). Fire labeling typically requires a rated core and listed components matched to the UL procedure.

Door Construction

Size & Handing: 36" x 84", LH Reverse (LHR).
Skins: 18-gauge galvannealed steel (A40/A60), prime painted for field finish.
Core:Polystyrene insulated for thermal efficiency (non-rated).
Edges & Reinforcements: Interlocked seams; reinforcement plates at hinges, lock/exit, and closer.
Exterior Use: Pair with perimeter weatherstripping and threshold for exposure to the elements.

Frame & Anchoring - Existing Brick Wall

KD punch & dimple retrofit masonry frame; ships knock-down for easy handling and in-place assembly.
Anchoring:Expansion/wedge anchors sized for solid brick (use appropriate anchors where veneer over stud is present); shim and fasten per submittals.
Factory strike and silencer locations matched to LHR handing and selected hardware.
Clearances/reveals coordinated for first-time fit and clean inspection.

Performance Advantages

Retrofit-ready: KD frame simplifies transport into existing openings.
Inspection-friendly: Code-aligned detailing reduces RFIs and rework.
Durability: 18-ga steel door skins with Grade 1 hardware preps for long service life.
USA-Made: Consistent quality with 3–4 week production on standard builds.

Typical Applications

Commercial exterior entries, service doors, and side egress in brick masonry.
Retrofit projects requiring KD frames designed for existing brick wall openings.
Education, healthcare, civic, industrial, and mixed-use facilities with documented compliance needs.

Key Specifications

Brand	Steel-Lite™
Nominal Size	36" x 84"
Handing	LH Reverse (LHR)
Door Skins	18-ga galvannealed steel, prime painted
Core	Polystyrene insulated (non-rated)
Frame	KD punch & dimple retrofit frame for existing brick wall
Compliance	NFPA 80 options; ADA/IBC alignment; UL/cUL labeled when ordered as a rated assembly
Country of Manufacture	USA
Typical Lead Time	3–4 week production

Important Notes

Verify brick type (solid vs veneer), anchor selection, and rough opening against approved shop drawings.
Final ADA/IBC compliance depends on field conditions (clearances, thresholds) and closer/lock adjustments.
Finish paint, glazing, hardware kits, and weather seals furnished per quote—confirm inclusions on your proposal.