Key Features

• Nominal door size: 36" x 84" (RH handing)
• 1" Low-E insulated glass unit (IGU), double-paned, tempered safety glass, pre-glazed
• ADA & IBC compliant storefront entrance assembly
• Grade 1 UL Listed, ANSI/BHMA certified hardware throughout
• Architectural clear anodized finish on heavy-wall aluminum stiles and rails
• Designed for wood stud wall with veneer façade applications

What’s Included (Pre-Installed / Packaged)

• Alumitrex™ storefront door leaf, RH, 36" x 84"
• 1" Low-E double-paned IGU with tempered safety glass, factory pre-glazed
• Heavy-wall aluminum rails/stiles (clear anodized)
• Heavy-duty deadbolt (Grade 1, UL Listed, ANSI/BHMA certified)
• ADA hydraulic door closer (Grade 1, UL Listed, ANSI/BHMA A156.4 compliant)
• Heavy-duty pivot hinges (top and bottom; ANSI/BHMA certified)
• Solid aluminum pull (interior) and push bar (exterior) set (ANSI/BHMA A156.6 compliant)
• Fastener kit for storefront hardware components

All included hardware is Grade 1, UL Listed, and ANSI/BHMA certified.

Energy & Glazing Performance

• 1" Low-E IGU improves insulation and energy efficiency
• Tempered safety glass ensures durability and building code compliance
• Factory pre-glazed for a precise fit and weather resistance

Compliance & Certifications

• ADA compliant approach, clearances, and operability
• IBC compliant storefront door assembly
• UL Listed and ANSI/BHMA Grade 1 hardware
• Tempered safety glass meeting commercial building standards

Wall Type & Mounting (Exterior Wood Stud Wall with Veneer)

Designed for exterior wood stud framing with veneer cladding systems such as brick, stone, or stucco. Provide adequate structural backing (e.g., doubled king/jack studs and engineered header). Coordinate weather-resistant barrier (WRB), flashing, and sealants with the façade system for a watertight installation.

• Anchor into studs and header using structural wood screws or lag bolts (by installer)
• Shim to maintain plumb, level, and square alignment during fastening
• Seal perimeter joints with commercial-grade backer rod and sealant
• Verify ADA-compliant swing clearance and threshold transitions

Anchoring fasteners for wood stud walls are not included, allowing installers to select the appropriate length, diameter, and type for the project’s stud and sheathing thickness.

Specifications

• Door Size: 36" x 84"
• Handing: RH
• Glazing: 1" Low-E double-paned IGU, tempered safety glass, pre-glazed
• Finish: Clear anodized aluminum
• Hardware: Grade 1 UL Listed, ANSI/BHMA certified (closer, deadbolt, pivots, pull/push hardware)
• Use: Exterior storefront entries in wood stud wall with veneer
• Origin: Made in USA
• Lead Time: 3–4 week production

Quality & Packaging

• Factory pre-glazing and pre-installed hardware reduce install time
• Protective wrapping and heavy-duty crating ensure safe freight delivery
• Installation instructions included

Notes

• Verify rough opening, stud layout, and veneer details before ordering
• Coordinate threshold and waterproofing with site conditions
• Site-specific conditions may require alternate fasteners or sealants (by installer)