Key Features

• Nominal door size: 40" x 86" (LH handing)
• Application-specific design for exterior brick wall openings
• Pre-glazed 1/4" tempered safety glass for commercial use
• ADA & IBC compliant storefront door package
• Grade 1 UL Listed, ANSI/BHMA certified hardware throughout
• Architectural clear anodized rails and stiles

What’s Included (Pre-Installed / Packaged)

• Alumitrex™ storefront door leaf, LH, 40" x 86"
• 1/4" tempered safety glass, factory pre-glazed with glazing vinyl
• Heavy-wall aluminum rails/stiles (clear anodized)
• Heavy-duty deadbolt (Grade 1, UL Listed, ANSI/BHMA certified)
• ADA hydraulic door closer (Grade 1, UL Listed, ANSI/BHMA A156.4 compliant)
• Heavy-duty pivot hinges (top and bottom; ANSI/BHMA certified)
• Solid aluminum pull (interior) and push bar (exterior) set (ANSI/BHMA A156.6 compliant)
• Fastener kit for storefront hardware components

All primary hardware components are Grade 1, UL Listed, and ANSI/BHMA certified.

Compliance & Certifications

• ADA compliant clearances and operability
• IBC compliant storefront entrance assembly
• UL Listed and ANSI/BHMA Grade 1 hardware
• Commercial tempered safety glass

Wall Type & Mounting (Exterior Brick Wall)

Designed for brick masonry construction (solid brick or brick veneer with structural backup). Installation requires masonry-appropriate anchors at jambs and threshold (furnished by installer to match site conditions). Ensure substrate is plumb, level, and structurally sound before installation.

• Anchor with masonry fasteners (e.g., sleeve or wedge anchors) sized for site conditions
• Shim at manufacturer-recommended points to maintain plumb, level, and square
• Seal perimeter with commercial-grade backer rod and sealant
• Verify smooth swing and ADA approach clearances

Masonry anchors for brick installation are not included, allowing contractors to select the correct diameter and embedment for the project’s specific brick and backup conditions.

Specifications

• Door Size: 40" x 86"
• Handing: LH
• Glazing: 1/4" tempered safety glass, pre-glazed
• Finish: Clear anodized aluminum
• Hardware: Grade 1 UL Listed, ANSI/BHMA certified (closer, deadbolt, pivots, pull/push hardware)
• Use: Exterior storefront entries in brick wall construction
• Origin: Made in USA
• Lead Time: 3–4 week production

Quality & Packaging

• Factory pre-glazing and hardware prep to minimize install time
• Protective wrapping and heavy-duty crating for freight transit
• Installation instructions included

Notes

• Verify rough opening, brick condition, and backup structure prior to ordering
• Coordinate threshold/transition with exterior grade and waterproofing
• Site conditions may require alternate anchors or sealants (by installer)