Key Features

• Application-specific design for exterior brick wall openings
• 1/4" tempered safety glass (pre-glazed)
• 10" ADA bottom rail for cane detection and accessibility
• Clear anodized architectural finish
• ADA & IBC compliant door package
• Grade 1 UL Listed, ANSI/BHMA certified hardware throughout

What’s Included (Pre-Installed / Packaged)

• Alumitrex™ storefront door leaf, 42" x 84", LH handing
• 1/4" tempered safety glass, pre-glazed with glazing vinyl
• 10" ADA bottom rail with matching top rail and stiles (clear anodized)
• Heavy-duty deadbolt (Grade 1, UL Listed, ANSI/BHMA certified)
• ADA hydraulic door closer (Grade 1, UL Listed, ANSI/BHMA A156.4 compliant)
• Heavy-duty pivot hinges (top and bottom; Grade 1, ANSI/BHMA certified)
• Solid aluminum pull & push bar set (ANSI/BHMA A156.6 compliant)
• Fastener kit and mounting hardware for storefront components

All primary hardware components are Grade 1, UL Listed, and ANSI/BHMA certified. Package ships prepped for efficient field installation into exterior brick wall openings.

Compliance & Certifications

• ADA compliant clearances and operability (including 10" bottom rail)
• IBC compliant storefront entrance assembly
• UL Listed and ANSI/BHMA Grade 1 hardware components
• Commercial tempered safety glass for storefront use

Wall Type & Mounting (Exterior Brick Wall)

Designed for brick masonry substrates (solid brick or brick veneer over structural backup). Typical installation uses masonry-appropriate anchors at jambs and threshold (contractor-furnished to match site conditions). Ensure substrate is plumb, level, and structurally sound prior to installation.

• Shim and anchor at manufacturer-recommended points
• Seal perimeter with commercial-grade backer rod and sealant
• Verify smooth, unobstructed swing and ADA approach clearances

Masonry anchors for brick (e.g., sleeve anchors) are not included, allowing installers to select the correct diameter and embedment for their specific brick and backup conditions to achieve the most secure installation.

Specifications

• Nominal Size: 42" x 84"
• Handing: LH
• Glazing: 1/4" tempered safety glass, pre-glazed
• Rails/Stiles: Heavy-wall aluminum, 10" ADA bottom rail
• Finish: Clear anodized
• Hardware: Grade 1 UL Listed, ANSI/BHMA certified (closer, deadbolt, pivots, pull/push hardware)
• Use: Exterior storefront entries in brick masonry wall construction
• Origin: Made in USA
• Lead Time: 3–4 week production

Quality & Packaging

• Factory pre-glazing and hardware preparation to reduce install time
• Protective wrapping and crating for freight transit
• Installation instructions included

Notes

• Verify rough opening, brick condition, and backup construction prior to ordering
• Site conditions may require alternate anchors or sealants (by installer)