Key Features

• Application-specific design for pre-cast concrete wall openings
• 1/4" tempered safety glass (pre-glazed)
• 10" ADA bottom rail for cane-detection and accessibility
• Clear anodized architectural finish
• ADA & IBC compliant entrance assembly
• Grade 1 UL Listed, ANSI/BHMA certified hardware throughout

What’s Included (Pre-Installed / Packaged)

• Alumitrex™ storefront door leaf, 48" x 80", LH handing
• 1/4" tempered safety glass, pre-glazed with glazing vinyl
• 10" ADA bottom rail with matching top rail and stiles (clear anodized)
• Heavy-duty deadbolt (Grade 1, UL Listed, ANSI/BHMA certified)
• ADA hydraulic door closer (Grade 1, UL Listed, ANSI/BHMA A156.4 compliant)
• Heavy-duty pivot hinges (top and bottom; Grade 1, ANSI/BHMA certified)
• Solid aluminum pull & push bar set (ANSI/BHMA A156.6 compliant)
• Fastener kit and mounting hardware for storefront components

All primary hardware components are Grade 1, UL Listed, and ANSI/BHMA certified. Package ships prepped for efficient field installation into exterior pre-cast concrete wall openings.

Compliance & Certifications

• ADA compliant approach, clearances, and operability (including 10" bottom rail)
• IBC compliant storefront entrance assembly
• UL Listed and ANSI/BHMA Grade 1 hardware components
• Commercial tempered safety glass for storefront use

Wall Type & Mounting (Exterior Pre-Cast Concrete)

Designed for pre-cast concrete panels (solid or sandwich) with appropriate structural backup. Typical installation uses concrete-rated anchors or embedded inserts at the jambs and threshold, coordinated with the project’s structural details. Ensure substrate is plumb, level, and structurally sound prior to installation.

• Shim and anchor at manufacturer-recommended points
• Seal perimeter with commercial-grade backer rod and sealant
• Verify smooth, unobstructed swing and ADA approach clearances

Concrete anchors are not included—this allows the installer to select the correct type, diameter, and embedment to match the panel design and engineer’s requirements for the most secure installation.

Specifications

• Nominal Size: 48" x 80"
• Handing: LH
• Glazing: 1/4" tempered safety glass, pre-glazed
• Rails/Stiles: Heavy-wall aluminum, 10" ADA bottom rail
• Finish: Clear anodized
• Hardware: Grade 1 UL Listed, ANSI/BHMA certified (closer, deadbolt, pivots, pull/push hardware)
• Use: Exterior storefront entries in pre-cast concrete wall construction
• Origin: Made in USA
• Lead Time: 3–4 week production

Quality & Packaging

• Factory pre-glazing and hardware preparation to reduce install time
• Protective wrapping and crating for freight transit
• Installation instructions included

Notes

• Verify rough opening dimensions, panel thickness, and backup structure prior to ordering
• Coordinate anchor type/locations with the project engineer
• Site conditions may require alternate anchors or sealants (by installer)