Pass Inspection Without Replacing Your Door
Failed an ADA or California Title 24 inspection because your storefront door does not have a compliant 10" bottom rail?
The StorefrontFix ADA Compliance Retrofit Kit for 36" storefront doors provides a simple and cost-effective alternative to replacing an existing aluminum storefront door. Designed specifically for retrofit applications, this solution helps building owners, contractors, facility managers, and property management companies address accessibility requirements without the expense of a complete door replacement.
ADA accessibility standards and California Title 24 accessibility regulations require smooth surfaces within the lower portion of many commercial entrance doors. These requirements help prevent wheelchair footrests, canes, walkers, and other mobility devices from catching on narrow rails, projections, or hardware mounted near the bottom of the door.
The StorefrontFix ADA Compliance Retrofit Kit mounts directly between the existing door stiles using high-bond adhesive mounting tape, creating a larger smooth lower door surface while maintaining the appearance of the existing storefront entrance system.
Manufactured from commercial-grade aluminum with a clear anodized finish, the standard kit is designed for 36" wide aluminum storefront doors and measures 6-3/4" high by 31-3/4" long. The panel may be field trimmed by the installer or custom cut by Door Closers USA before shipment when a specific length is provided.
Many storefront doors fail accessibility inspections simply because the bottom rail does not provide the required smooth surface area. The StorefrontFix ADA Compliance Retrofit Kit allows you to upgrade an existing door rather than replace the entire entrance, saving time, labor, and material costs.
ADA Section 404.2.10 and California Title 24 require a smooth lower door surface extending 10" above the finished floor on many commercial doors.
The StorefrontFix ADA Compliance Retrofit Kit helps existing storefront doors meet this requirement without replacing the entire door.
The standard kit is designed for 36" storefront doors and ships at 31-3/4" long. The panel can be easily trimmed in the field by the installer, or Door Closers USA can custom cut the panel to your specified length prior to shipment. Simply provide your required finished length when placing your order.
Note: Accessibility requirements may vary by jurisdiction and application. Building owner and installer are responsible for verifying compliance with all applicable federal, state, and local codes.
Our specialists are just a phone call away. Call 866-232-5673 and we will gladly assist you!
