Regulated Access Control Power Supply With Battery Option For Electrified Lock Hardware Integration
American Entrance Control power supplies are the best on the market today. These power supplies are designed for powering door and access control products such as electric strike, magnetic locks, electrified solenoid latch retraction exit devices, motorized latch retraction exit devices and much more.
Access Control Power Supply With Battery Option Electrical Specifications
- Over-Voltage Power Protection
- Output Voltage Potentiometer
- Temperature Range: 0 to 49 degrees C; 32 to 120 degrees F
- Maximum Humidity: 85%
- Red Watchdog LED Indicates A/C Power
- Green Watchdog LED Indicates D/C Output Power
Access Control Power Supply With Battery Option Types
This option is really dependent on how you plan to use the power supply. We offer power supplies with or without battery back up and offer a variety of amperage ranges which can power multiple electrified locks such as electric strikes, magnetic locks, electrified exit devices, electrified cylindrical locks, electrified mortise locks, and more.
- 1.5 Amp, 24VDC, 1 Solid State I/O, Fire Alarm Tie In, Up To 1 Electrified Locks
- 2 Amp, 24VDC, 2 Solid State I/O, Fire Alarm Link, Up To 2 Electrified Locks
- 2 Amp, 24VDC, Battery Back Up, 2 Solid State I/O, Fire Alarm Link, Up To 2 Electrified Locks
- 4 Amp, 24VDC, Battery Back Up, 4 Solid State I/O, Fire Alarm Link, Up To 4 Electrified Locks
- 4 Amp, 24VDC, Battery Back Up, 8 Solid State I/O, Fire Alarm Link, Up To 4 Electrified Locks
1.5 Amp, 24VDC, 1 I/O Model Electrical Specifications
- Input Voltage: 120 VAC, 60 Hz
- Input Fuse: 2 Amp Fuse @ 250VAC
- Output Voltage: 1.5A @ 24VDC
- 1 Each Solid State I/O (Input / Output): 1.5 Amp Auto Resetting Fused Output
- Built In Fire Alarm Tie-In
- Cabinet Size: 11" Width x 11" Height x 4" Depth
- Can handle up to one electrified locks (motorized or solenoid exit device latch retraction, maglocks, electric strikes, electrified cylindrical or mortise locks, etc)
2 Amp, 24VDC, 2 I/O Model Electrical Specifications
- Input Voltage: 120 VAC, 60 Hz
- Input Fuse: 2 Amp Fuse @ 250VAC
- Output Voltage: 2A @ 24VDC
- 2 Each Solid State I/O (Input / Output): 1 Amp Auto Resetting Fused Output
- Fire Alarm Link
- Cabinet Size: 11" Width x 11" Height x 4" Depth
- Can handle up to two electrified locks (motorized or solenoid exit device latch retraction, maglocks, electric strikes, electrified cylindrical or mortise locks, etc)
2 Amp, 24VDC, 2 I/O, Battery Back Up Model Electrical Specifications
- Input Voltage: 120 VAC, 60 Hz
- Input Fuse: 2 Amp Fuse @ 250VAC
- Output Voltage: 2A @ 24VDC
- 2 Solid State I/O's (Input / Output): 1 Amp Auto Resetting Fused Output
- Fire Alarm Link
- Cabinet Size: 13" Width x 15.5" Height x 5" Depth
- Can handle up to two electrified locks (motorized or solenoid exit device latch retraction, maglocks, electric strikes, electrified cylindrical or mortise locks, etc)
- Includes Battery Backup Circuit (Batteries Not Included)
4 Amp, 24VDC, 4 I/O, Battery Back Up Model Electrical Specifications
- Input Voltage: 120 VAC, 60 Hz
- Input Fuse: 2 Amp Fuse @ 250VAC
- Output Voltage: 4A @ 24VDC
- 4 Solid State I/O's (Input / Output): 1.5 Amp Auto Resetting Fused Output
- Fire Alarm Link
- Cabinet Size: 13" Width x 15.5" Height x 5" Depth
- Can handle up to four electrified locks (motorized or solenoid exit device latch retraction, maglocks, electric strikes, electrified cylindrical or mortise locks, etc)
- Includes Battery Backup Circuit (Batteries Not Included)
4 Amp, 24VDC, 8 I/O, Battery Back Up Model Electrical Specifications
- Input Voltage: 120 VAC, 60 Hz
- Input Fuse: 2 Amp Fuse @ 250VAC
- Output Voltage: 4A @ 24VDC
- 8 Solid State I/O's (Input / Output): .75 Amp Auto Resetting Fused Output
- Fire Alarm Link
- Cabinet Size: 13" Width x 15.5" Height x 5" Depth
- Can handle up to four electrified locks (motorized or solenoid exit device latch retraction, maglocks, electric strikes, electrified cylindrical or mortise locks, etc)
- Includes Battery Backup Circuit (Batteries Not Included)
Access Control Power Supply With Battery Option Mechanical Specifications
- Cabinet Sizes: Non-Battery Back Up Models are 11" Width x 11" Height x 4" Depth. Battery Back Up Models are 13" Width x 15.5" Height x 5" Depth.
- 1/2" & 3/4" knockouts on all sides for electrical conduit
Access Control Power Supply With Battery Option Certification
Access Control Power Supply Universal Door Controller Option
This option allows you to include the American Entrance Controls Universal Door Controller board to the power supply cabinet. The Universal Door Controller is 12 or 24 VAC / VDC and includes: 3 adjustable time delay relays 1 to 30 seconds, 2 wet inputs, 2 dry inputs, and a bi direction sequencing mode. The Universal Door Controller is designed to integrate electric strikes, magnetic locks, electrified exit devices, electrified mortise locks, electrified cylindrical locks, and any other electrified locking hardware.