DC USA Approved CL180-LE Low Energy Series Electrified Storeroom Cylindrical Lock, 2-3/4" Backset
The DC USA Approved CL180 LE series is a low-energy, cost efectve cylindrical lock that isideal for any contnuous duty applicaton or conditon requiring low surge and hold current. Itsunique electronics allow the CL180LE to functIon much like a motor-driven lockset without thepotental problems inherent in motors. The CL180LE will operate with an input voltage between11-30 volts, eliminatng the need to inventory 12 and 24V models. The CL180LE features astandard built-in Request to exit (REX/AE) switch
Features:
Low maximum current draw 400 mA (12V) - usemore locks on a single power supply. Additonalsavings for the owner
Low holding current 30 mA - reliable operaton andmeets sustainable consideraton
Available SFIC or LFIC (Schlage) - Cylinder notincluded
Available with Schlage C type keyway standard
2-3/4" Backset
Specifications:
Operating Voltage - 11-30 VDC
Surge Current: 400 mA @12V, 200 mA @ 24V
Holding Current: 30 mA
Specify Fail Safe (EL) or Fail Secure (EU)
Recommended Locking Hardware Power Supplies:
PS204/PS204B
PS220/220B
PS480B
PS2
PS5-8
Models Available:
CL180LE-EL :(fail safe):Outside lever locked (EL) electronically. Latchbolt retracted by key outside or leverinside. Switched power allows outside lever to retract latchbolt. Inside lever isalways free for immediate egress.
CL180LE-EU (fail secure):Outside lever unlocked (EU) electronically. Latchbolt retracted by key out-side orlever inside. Switched power allows outside lever to retract latchbolt. Inside lever isalways free for immediate egress