DC USA Approved CL370EL Fail Safe Electrified Storeroom Cylindrical Lock, 2-3/4" Backset (Sargent 10 Line Series Replica)
The DC USA Approved electrified version of the Sargent 10 Line series cylindrical lock lineallows for remote keyless access and egress control for heavy use applications where securityand safety is critical. These locks may be purchased as complete locks or as modificationsonly (add MD prefix for modification only of customers' 10 line series). Along with the stylesand finishes listed, we offer multiple functions and voltages to meet your requirements.Common applications include stairwell doors, lobby entrances, computer rooms, classrooms,interior and exterior doors.
Features:- Continuous duty solenoids allow for continuously on applications such as Fail Safe or an unlock cycle
- Plug-in bridge rectifier that allows for an AC or DC power source
- Low current draw
Options:- Available Fail Safe (Electrically Locked) or Fail Secure (Electrically Unlocked)
- Voltage options - 12V or 24V (AC/DC)
- REX - Request to Exit or AE switch available (on all functions)
- CRU2 - Current Reduction Unit to improve solenoid life in continuously on applications
Specifications:- Operating Voltage - 12 or 24VAC/DC (+or- 10%) (must specify 12 or 24 volts when ordering)
- Amperage - 12V = 250 mA / 24V = 150 mA
- Power consumption - 3 watts
- Solenoid coil resistance - 12V = 49 Ohms / 24V = 159 Ohms
Recommended Locking Hardware Power Supplies:- PS204/PS204B
- PS220/220B
- PS480B
- PS2
- PS5-8
Models Available:- CL370EL - storeroom::(fail safe):Outside lever locked (EL) electronically. Latchbolt retracted by key outside orlever inside. Switched power allows outside lever to retract latchbolt. Insidelever is always free for immediate egress.
- CL371EU - storeroom:(fail secure):Outside lever unlocked (EU) electronically. Latchbolt retracted by key outside orlever inside. Switched power allows outside lever to retract latchbolt. Inside leveris always free for immediate egress.
