• Need Help? 866-232-5673 M-F 9AM-3PM CST

Navigate to the undefined homepage

FREE SHIPPING ON ALL ORDERS
Only within the Continental U.S.

Commercial Door Pull Handle Kit

*Storefront Door Not Included

Commercial Door Pull Handle Kit - Image 1 of 0
Commercial Door Pull Handle Kit - Image 2 of 0
Commercial Door Pull Handle Kit - Image 3 of 0
Commercial Door Pull Handle Kit - Image 1 of 0
Commercial Door Pull Handle Kit - Image 2 of 0
Commercial Door Pull Handle Kit - Image 3 of 0
Commercial Door Pull Handle Kit - Image 4 of 0
Commercial Door Pull Handle Kit - Image 1 of 0
Commercial Door Pull Handle Kit - Image 2 of 0
Commercial Door Pull Handle Kit - Image 3 of 0
Commercial Door Pull Handle Kit - Image 4 of 0
Commercial Door Pull Handle Kit - Image 5 of 0

Commercial Door Handle Kit, Easy Removal or Installation

Door Closers USA
List Price: $267.06
$
Savings: $

Item Return Policy: Assembled Per Order, Non-Returnable
Choose your options:
(47OPH) Finish:
(47OPH) Center To Center:
(47OPH) Mounting Type:
Product Code: PHCDHK
Usually Ships in 24 Hours
This product qualifies for FREE SHIPPING!

ADA Commercial Door Pull Handle Kit

Tahoma storefront door pull handles are designed to mount to any storefront door. Each Tahoma pull handle is commercial grade and manufactured from 1" diameter solid aluminum, so bending or denting will not occur even on the most abusive storefront entrance doors. Tahoma storefront door pull handles are class 1 anodizing providing an overall finish protection as well as UV protection.

ADA Compliance

ADA, or the American Disabilities Act, was a law passed in 1990 to ensure equal accessibility for all. The guidelines must be followed by all commercial buildings. Unfortunately, in today's market there are many imported pull handles and push bars being offered for very inexpensive prices, that do not meet the ADA guidelines. This is most likely because they are manufactured in countries which do not follow or have these guidelines set into place. If you are a building owner or contractor, when you purchase a Tahoma storefront door handle, you can have the peace of mind knowing that our products are ADA compliant and Building Code Compliant.

Installation

The Tahoma storefront door offset pull handle can be retrofitted to replace any existing storefront door offset pull handle. Tahoma offset pull handles come in the 3 standard center to center mounting measurements used in the storefront door industry, which are 9", 10", and 12". If your storefront door has an oddball center to center measurement, then a standard Tahoma offset pull handle can still be installed by simply drilling new center to center holes in the door stile. The old, existing mounting holes from the non-standard pull handle can be filled with bondo and then re-sprayed with touch up paint.

Commercial Door Pull Handle Kit Features

  • Heavy Duty Offset Pull Handle
  • Standard 9", 10", or 12" Center To Center Handles
  • For Use On Commercial Aluminum Storefront Doors
  • 3-1/4" Offset
  • 2-1/4" Projection
  • 2-1/4" Door Clearance
  • Hardware Included
  • 1" Diameter Solid Aluminum
  • Class 1 Anodized Finish

Commercial Door Pull Handle Kit Center To Center Measurement

The center to center measurement is the distance between the centerline of the top portion of the pull handle and the bottom portion. Refer to the product image for an illustration.

Commercial Door Pull Handle Kit Mounting Types

With pull handles there are a variety of mounting methods.

Tahoma Thru Bolt Mounting

Thru bolt mounting uses a heavy duty thru bolt designed to connect the pull handle through the door. A finished thru bolt head is visible on the opposite side of the door stile. Thru bolt mounting is standard for all door manufacturers. Please refer to the product image for reference.

Tahoma Concealed Mounting

Concealed mounting uses a heavy duty bolt that attaches to the door stile. A concealed set screw at the bottom of the pull handle holds it on the bolt. No visible bolt head is on the opposite side of the door stile. Please refer to the product image for reference.

Tahoma All Glass Door Thru Bolt Mounting

This option allows you to mount the pull handle directly on glass up to 1/2" thickness. Includes thru-bolt fasteners with finished button caps.
For more shipping information please see click here.

Here To Serve You

Have Questions or Need Help?

Our specialists are just a phone call away. Call 866-232-5673 and we will gladly assist you!

Reviews

Average Rating:
( 0 )
Empty Cart