Door Controls USA 4116 Surface-Mount Door Closer — Heavy-Duty Grade 1, Adjustable Size 1–6, Spring Cushion Hold-Open Arm, Parallel Mount Only, Aluminum Finish

The Door Controls USA 4116 is a heavy-duty, ANSI/BHMA Grade 1 surface-mount door closer configured with a spring cushion hold-open arm for controlled opening and a manual, adjustable hold-open setting during busy hours. This model installs in parallel arm (push-side) mount only for a low-profile, tamper-resistant installation. With adjustable spring power Size 1–6, independent closing and latch speed valves, and opening check (backcheck), the 4116 delivers smooth, reliable control on high-traffic commercial openings. The clean aluminum finish complements modern storefronts and interiors.

How the Spring Cushion Hold-Open Works

• Spring cushion absorbs impact as the door approaches full open to protect frames and hardware.
• Manual hold-open lets you set an adjustable angle (project dependent) to keep the door open for peak traffic.
• Disengage by moving the door past the set point or reducing the arm’s friction tension, returning to self-closing mode.

Key Features

• ANSI/BHMA Grade 1 performance for demanding, high-traffic use
• Adjustable spring power Size 1–6 to match door size, weight, and conditions
• Independent closing speed and latch speed control for precise operation
• Opening check (backcheck) to cushion against abrupt stops and wind gusts
• Spring cushion hold-open arm for set-and-stay convenience
• Parallel arm (push-side) mount only for a low-profile, vandal-resistant install
• Aluminum finish for a clean architectural look

Specifications

What’s Included

• 4116 closer body
• Spring cushion hold-open parallel arm assembly
• Standard mounting hardware for parallel arm installation
• Installation instructions

Notes

• Fire-door note: Mechanical hold-open arms are generally not permitted on labeled fire doors unless released by an approved life-safety system. Confirm require