Entry Systems ES4300 Surface Mount Door Closer - Heavy-Duty Grade 1, Adjustable Size 1–6, Spring Cushion Hold-Open Arm, Parallel Mount Only, Aluminum Finish
The Entry Systems ES4300 Series is a heavy-duty, ANSI/BHMA Grade 1 surface mount door closer configured with a spring cushion hold-open arm for controlled opening and convenient, manual hold-open. This model is designed for parallel arm (push-side) mount only, delivering a low-profile installation that stands up to high-traffic commercial use. The aluminum finish complements storefront and interior applications.
How the Spring Cushion Hold-Open Works
- Spring cushion reduces shock as the door approaches full open, helping protect hinges, frames, and walls.
- Manual hold-open lets you set the door to stay open at an adjustable angle (project dependent) during busy periods.
- Disengage by gently pulling the door past the set point and allowing it to close under controlled speed.
Core Closer Performance
- Adjustable spring power Size 1–6 to match door size, weight, and onsite conditions.
- Independent closing speed and latch speed valves for smooth, reliable closing and positive latch.
- Opening check (backcheck) adjustment to cushion against abrupt stops and wind gusts.
- Parallel arm (push-side) mount only for a clean, vandal-resistant profile.
Fire-Door Note: Mechanical hold-open arms are generally not permitted on labeled fire-rated doors unless released by an approved life-safety system. Confirm local code and AHJ requirements before specifying.
Key Features
- Grade 1 performance for demanding commercial openings
- Spring cushion hold-open arm — adjustable hold-open angle with cushioned opening
- Adjustable Size 1–6 spring power
- Adjustable closing speed, latch speed, and backcheck
- Parallel arm mount only (push-side)
- Aluminum finish for a clean architectural look
Specifications
| Brand / Model | Entry Systems ES4300 |
|---|
| Type | Surface Mount Door Closer |
|---|
| Grade | ANSI/BHMA Grade 1 |
|---|
| Spring Power | Adjustable Size 1–6 |
|---|
| Arm | Spring Cushion Hold-Open (manual, angle adjustable) |
|---|
| Adjustments | Closing speed, Latch speed, Opening check (Backcheck) |
|---|
| Mounting | Parallel arm (push-side) only |
|---|
| Finish | Aluminum |
|---|
| Applications | Retail, office, education, healthcare, and other commercial facilities |
|---|
What’s Included
- Entry Systems ES4300 Series closer body
- Spring cushion hold-open parallel arm assembly
- Standard mounting hardware for parallel arm installation
- Installation instructions
Notes
- Commissioning: set spring power (Size 1–6) and fine-tune closing, latch, backcheck, and hold-open tension onsite.
- Verify door size/weight, frame conditions, and substrate; use appropriate fasteners/anchors.
- Confirm local code requirements for hold-open use, especially on fire-rated or egress doors.
![]()
![]()
![]()
![]()
![]()
