DC USA Approved PD10-M-RIM Electrified Rim Exit Device With Motorized Latch Retraction (Doromatic/Falcon 1790 and First Choice 3700 Replica)
The PD10-M exit device series is a UL listed narrow stile motorized latch retraction device that retrofits Dor-o-matic 1690/1790 & First Choice 3600/3700 exit devices.
The DC USA Approved PD10-M series is a motorized latch pullback Grade 1 storefront exit devicethat refrofits First Choice 3600/3700 & Dor-o-matic 1600/1700 series. All PD10-M models areequipped with our PTS "push to set" technology. We know that door conditions change and inretrofit scenarios you never know exactly what you're walking into. But with our PTS adjustmentyour post installation adjustment is greatly simplified in 5 quick seconds. Install this device withthe confidence of knowing that the PD10-M meets or exceeds the high standards of other grade 1products.
Specifications:- Voltage Range - 24 TO 28 VDC
- System Protection - Unit shutdown when voltage exceeds 28VDC
- Standard - Average Current Peak: 1.3A,Average Current Hold: 180MA
- High Torque - Average Current Peak: 2A, Average Current Hold: 250MA
- PTS Adjustment - Approx. 1/4"
- Wire Run:300' with 18ga wire
- Cutdown Details:36" - 1-1/4"48" - 1-1/4"
Features:- Next Generation MM4 Smart Module: On boarddiagnostics with audible feedback for adjustmentand power issues
- "PTS": 5 second electronic adjustment for easypost installation adjustment
- Electric dogging rated for continuous duty - Autore-engage if push pad is pulled from dogged position
- Low Current Draw - Field switchable to a "LowCurrent" or "High Torque" mode
- Up to 300' wire run with 2-18ga wire - Long wireruns provides installer with convenience of placingthe Command locking hardware power supply ina centralized location; i.e. the same closet as the accesscontrol panel
- 8' cable with Quick Connect for MM4 module toeasily connect to power supply lead.
- UL listed
