Phoenix Architectural Hardware 5 in. x 2-1/4 in. Surface Mount Door Closer - Heavy-Duty Grade 1, Adjustable Size 1–6, Spring Cushion Arm (No Hold-Open)

The Phoenix Architectural Hardware 5 in. x 2-1/4 in. door closer is a heavy-duty, ANSI/BHMA Grade 1 surface mount door closer configured with a spring cushion arm that absorbs opening shock near full swing —without any hold-open feature. With adjustable spring power Size 1–6, independent closing and latch speed valves, and adjustable opening check (backcheck), the door closer delivers smooth, reliable control on high-traffic commercial openings while protecting frames, hinges, and walls.

Where the Spring Cushion Arm Helps

• Cushions the door as it approaches full open to reduce impact and wear.
• No hold-open detent — ideal where hold-open is not desired or not code-permitted.
• Supports Regular (pull-side), Top Jamb (push-side), and Parallel Arm (push-side) mounting.

Key Features

• ANSI/BHMA Grade 1 performance for demanding, high-traffic use
• Adjustable spring power Size 1–6 to match door size, weight, and site conditions
• Adjustable closing speed and latch speed for precise control
• Adjustable opening check (backcheck) to cushion against abrupt stops and wind gusts
• Spring cushion arm (no hold-open) for impact reduction without detent
• Multi-mount capability: Regular / Top Jamb / Parallel

Specifications

What’s Included

• Door closer body
• Spring cushion arm assembly (no hold-open)
• Standard mounting hardware (per selected installation)
• Installation instructions

Notes

• Commissioning: set spring power (Size 1–6) and fine-tune closing, latch, and backcheck valves onsite.
• Verify door size/weight, frame conditions, and substrate; use appropriate fasteners/anchors.
• No hold-open detent — generally appropriate where hold-open is restricted; always confirm local code and AHJ requirements.