RHR Exterior Hollow Metal Door - Retrofit Frame w/ Screws for Existing Steel Stud (RO 40-1/2" x 86-1/4")

Engineered for Compliance, Trusted by Inspectors.

RHR Exterior Hollow Metal Door - Retrofit Frame w/ Screws for Existing Steel Stud (RO 40-1/2" x 86-1/4") - Image 1 of 0

RHR Exterior Hollow Metal Door - Retrofit Frame w/ Screws for Existing Steel Stud (RO 40-1/2" x 86-1/4") - Video 2 of 1

Exterior Hollow Metal Door, RHR For Existing Steel Stud Wall Opening, Retrofit Frame w/ Screws (Fits RO 40-1/2" x 86-1/4"), USA-Made (3-4 Week Production)

$

Choose your options:

Frame Jamb Depth:

4-3/4" Jamb Depth (3-3/4" Throat)

5-3/4" Jamb Depth (4-3/4" Throat)

6-1/4" Jamb Depth (5-1/4" Throat)

6-3/4" Jamb Depth (5-3/4" Throat)

7-1/4" Jamb Depth (6-1/4" Throat)

7-3/4" Jamb Depth (6-3/4" Throat)

8-1/4" Jamb Depth (7-1/4" Throat)

8-3/4" Jamb Depth (7-3/4" Throat)

9-1/4" Jamb Depth (8-1/4" Throat)

ADA Glass Window

ADA Glass Window:

No Thanks

6 in. Wide x 27 in. Narrow Window, 1/4" Tempered Clear Glass (No Fire Label)

6 in. Wide x 27 in. Tall Fire Rated Narrow Window, 1/4" Laminated Wire Glass

12 in. Wide x 12 in. Square Window, 1/4" Tempered Clear Glass (No Fire Label)

12 in. Wide x 12 in. Tall Fire Rated Square Window, 1/4" Laminated Wire Glass

24 in. Wide x 30 in. Tall Half Lite Window, 1/4" Tempered Clear Glass (No Fire Label)

24in. x 64 in. Full Lite Window, 1/4" Tempered Clear Glass (No Fire Label)

Product Code: SLTEOAMWT3070RHR

Inspection-Ready, Built to Spec, 3 to 4 Week Production

Orders Over $200 Qualify for FREE SHIPPING!

Qty:

Steel-Lite™ Exterior Hollow Metal Door - RHR (Existing Steel Stud Opening, Fits RO 40-1/2" x 86-1/4")

Built for existing steel stud wall openings, this Steel-Lite™ package pairs a Right Hand Reverse (RHR) exterior hollow metal door with a retrofit frame and included screws for direct stud attachment. Delivered Prime Gray and configurable with NFPA 80 fire-rated options and UL/cUL listing when ordered as a complete labeled assembly. USA-made with a dependable 3–4 week production timeline.

Application-First Highlights

Use: Exterior retrofit into existing steel stud construction
Fit: Sized to rough opening (RO) 40-1/2" W × 86-1/4" H (typical)
Weatherability: Compatible with perimeter weatherstripping, threshold/saddle, sealant, and flashing details
Handing:RHR (Right Hand Reverse)

Frame & Installation – Existing Steel Stud

Retrofit frame designed for clean fit-up in existing openings
Screws included for fastening the frame to steel studs (spacing and edge distances per submittals)
Factory strike and silencers located for RHR handing; reveals targeted for first-time fit
Coordinate perimeter sealant and sill/threshold to suit exposure and code requirements

Compliance & Listing Options

NFPA 80 fire door options with UL/cUL labels when supplied and installed as a complete labeled assembly (door, frame, listed hardware) per the UL listing
ADA & IBC alignment: approach/clear width, operable parts, and closer force/speed when properly adjusted
Hardware readiness: Factory preps available for ANSI/BHMA Grade 1 hinges, locks/exit devices, and closers

Note: Standard insulated cores are non-rated. If a labeled fire door is required, specify a fire-rated core and listed seals/threshold/hardware to match the UL procedure and AHJ requirements.

Door Construction

Skins: 18-gauge galvannealed steel (A40/A60), Prime Gray for field topcoat
Core: Insulated by default; fire-rated core available per specification/listing
Edges & Reinforcements: Interlocked edges; reinforcement plates at hinges, lock/exit, and closer
Exterior readiness: Pair with specified threshold and perimeter weather seals for exposure

Performance Advantages

Retrofit-ready: Purpose-built frame and included screws streamline installation
Spec-grade durability: 18-ga steel with robust hardware reinforcements
Inspection-friendly: Code-aligned detailing minimizes RFIs and rework
USA-made: Consistent quality with 3–4 week standard production

Key Specifications

Brand	Steel-Lite™
Application	Exterior – Existing steel stud wall opening
Rough Opening	40-1/2" W × 86-1/4" H (typ.)
Handing	RHR (Right Hand Reverse)
Door Skins	18-ga galvannealed steel, Prime Gray
Core	Insulated; fire-rated core available per spec/listing
Frame	Retrofit frame; screws included for stud attachment
Compliance	NFPA 80 options; ADA/IBC alignment; UL/cUL when ordered as labeled assembly
Country of Manufacture	USA
Lead Time	3–4 week production (standard)

Important Notes

Verify stud gauge/spacing, screw type/length, and RO against approved shop drawings prior to installation
For labeled fire doors, use the specified rated core and listed seals/threshold/hardware per the UL listing
Field painting, glazing, weather seals, and hardware kits furnished per quote—confirm inclusions on your proposal