Steel-Lite 36" x 84" ADA Building Code Compliant 18 Gauge Steel Door, Right Hand Reverse, 16 Gauge Knock Down Frame For Existing Wood Stud Wall With Drywall, ANSI and BHMA Compliant Silver Hardware, Made In USA (3-4 Week Production)
The Steel-Lite 36" x 84" hollow metal door (RH Reverse) is engineered for code-driven projects. It aligns withNFPA 80 fire door assembly requirements (when specified), ADA accessibility, and IBC life-safety provisions, withUL/cUL labeled fire-rated options and factory preparations for ANSI/BHMA Grade 1 hardware. Built in the USA for consistent, inspection-ready performance.
Compliance & Listings
- NFPA 80 fire-rated assembly options available with UL/cUL labeled doors, frames, and listed hardware configurations.
- ADA-compliant opening compatibility when paired with compliant thresholds, hardware, and proper installation practices.
- Designed to support IBC life-safety and egress requirements for commercial corridors, offices, tenant improvements, and rated wall assemblies.
- Factory prepped and reinforced for ANSI/BHMA Grade 1 commercial locks, closers, hinges, and exit devices.
- Built for inspection-ready commercial applications where code compliance and long-term durability matter.
ā Compliance MattersMany low-cost imported commercial doors sold online are not properly reinforced, lack traceable fire-label documentation, or are supplied with non-certified commercial hardware.Installing non-compliant openings can:
- Fail commercial building inspections
- Violate NFPA 80 fire door requirements
- Create ADA accessibility issues
- Lead to premature hardware failure
- Require expensive field corrections or replacement
Steel-Liteā¢ commercial openings are designed for professional commercial applications where reliability, documentation, and code compliance matter.
Note: Final code compliance is determined by the complete assembly as installed in the field. Verify local AHJ requirements and approved hardware schedules prior to ordering.
Construction & Materials
- Size & Handing: 36" x 84", RH Reverse.
- Skins: 18-gauge A60 galvannealed steel with rust-inhibiting gray primer paint finish. Surface is paint-ready for field finishing if desired.
- Core: Energy-efficient polystyrene insulated core (non-rated).
- Edges & Reinforcements: Interlocking seams; heavy backing plates at hinge, lock, and closer locations for long service life.
- Environmental Suitability: Appropriate for commercial interior/exterior openings when paired with specified weatherstrip/threshold systems.
Dimensions
- Outside Frame Dimensions: 40" Wide x 86" Tall
- Rough Opening Requirement: 38" Wide x 85" Tall
What Comes With This Steel-Lite Door Package
- 1 - 36" x 84" 18 Gauge Steel Door: hollow metal door with insulated polystyrene core, reinforced hinge, lock, and closer locations.
- 1 - 16 Gauge Knock Down Drywall Frame: Designed for installation into an existing wood stud wall with drywall.
- 1 - Heavy Duty Commercial Door Closer: ANSI/BHMA A156.4 Grade 1 rated closer designed for high-use commercial openings. Features a cast-iron style body, forged steel arm, adjustable spring power, low-friction bearings, non-handed cover, and fasteners. Meets ADA reduced opening force requirements when properly adjusted and installed.
- 1 - Grade 1 Commercial Lever Lock: Heavy duty cylindrical lever lock designed for new construction and retrofit commercial openings. Built for extreme durability with resistance to abusive lever torque, pry attacks, lever droop, and long-term cycle wear.
- 1 - Commercial Door Sweep: Aluminum retainer with densely compressed nylon brush seal. Helps reduce light, air, wind, rain, snow, smoke, fumes, heat loss, and pest infiltration. Flexible brush conforms to surface irregularities and remains flexible in low temperatures.
- 1 - Frame Gasket Seal Set: Commercial perimeter gasket seal designed to help seal gaps around the door frame. Punched with slotted adjustment holes for easier installation and alignment.
- 1 - ADA Compliant Door Threshold: 5" wide x 1/2" tall low-profile flat saddle threshold made from thick, durable metal. Provides an ADA accessible transition for commercial openings and helps create a smooth walking surface.
- Commercial Mounting Hardware: Includes required fasteners for the supplied door hardware components.
Note: Final code compliance depends on the complete installed assembly, field conditions, hardware adjustment, threshold height, floor conditions, and local AHJ requirements.
